Do have plenty of oil actually just changed it and got a new icp per a mechanic and am waiting to get time to take it back to him so he can run his diagnostic tool with it getting data from the icp
Thanks for the reply from all will post when I know more
To clarify the smoke is like grey fuel smelling like it's getting fuel but not firing off
UPDATE: Changed IPR and oil temp sensor and made no difference but if you unplug the oil temp sensor it will start after several tries with a very low rpm idle that is very rough and smoothes out the...
My dad just got a 03 F350 166xxx miles 100% stock and is having cold start issues and can't really find any answers in a search so I'm asking. The truck will crank over fast and even sound like a cylinder or more is trying to hit and gets smoke out of tail pipe but will not start if you dont...
I belive I need a new pump for my rig and when I look up a pump for an 89 7.3 I come up with two different ones one pre 3/89 and one post an since my engine is not in its original home and the donor rig is long gone whats the difference one seems to be in stock in most stores one has to be...
Well got done didn't get to do it after I posted this like I thought but I got it done finally never did find a whole on my box which I can't believe so I drilled and tapped one of my own its not hooked up in this picture but thats the location I decided on
Thsnks for the input
sent from my...
I dont have an intake hat my air box and intake are all one I know it has to be on the pressure side I was just wondering where everyone else's was on a system like mine
sent from my phone so my spelling and grammer most likely suffer more than usual
Ok thanks I dont remember if my box has that drop down like that but im sure it does my cdr is mounted like normal for the kit but I turned it over so the hose went down for a cleaner look
you can kinda see it here I made a 90 from a plastic barb to pipe thread adapter I found at the hardware store
I've looked all over and there is no tapped whole for the gauge tube on this air box so my question is were should I drill and tap a hole at? If anyone has a setup like this where's yours at? Any pics would be great help
Thanks
Ben
sent from my phone so my spelling and grammer most likely...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.