An offer to all the folks here.

[gatorman21218]

I have the 1991 manual and its bigger than the richmond phone book. and the engine manual is half the size of that one

 

[Brimmstone]

I've got the manuals for SDs up to 02 and they're immense. Main truck manual is at least 4 inches thick. The engine manual is almost as thick. I've turned down a grand for them both a few months ago.

 

[88beast]

if it wouldnt be much id like everything in pdf for an 88 f250 idi 4x4
also anything on the c6 t19 and 1356 and 1345 t cases
i got wiring bugs and i plan a lot of work ahead so if it would be easier id apprieciate it
pm me if you can ill send my email

 

[Alex S]

Hmmm if you get the chance

A cause control wiring diagram for a 85 GMC suburban

Thank you

 

[Brimmstone]

Hmmm if you get the chance

A cause control wiring diagram for a 85 GMC suburban

Thank you

Have them sitting in PDF files including vacuum diagram. Send email to me in PM

 

[hesutton]

Wiring diagram for '86 F250/F350 6.9 IDI?

Heath

 

[david85]

Sorry about your leg!

We had a family member go through a similar accident a few years ago and it was no picnic. Hope you recover fast and well.

 

[adtman]

Too much trouble asking for the torques specs on a clutch assy for a 93 f250 turob 4x4? I am upgrading to the single mass. Thanks, flywheel and plate....

Thanks

John Lowry [email protected]

 

[trackspeeder]

I've got the manuals for SDs up to 02 and they're immense. Main truck manual is at least 4 inches thick. The engine manual is almost as thick. I've turned down a grand for them both a few months ago.

The SD manuals are getting some good coin today. I keep a set in the office. Along with the Corn binder version of the engine manuals.

 

[Brimmstone]

Too much trouble asking for the torques specs on a clutch assy for a 93 f250 turob 4x4? I am upgrading to the single mass. Thanks, flywheel and plate....

Thanks

John Lowry [email protected]

I'll get them to you tomorrow. I just got home and am about to crash for the night.

 

[93f250idi]

to much trouble for a cruise control diagram for a 93 f350 7.3 n/a 2wd 5 speed? email is [email protected] thanks!

 

[riotwarrior]

Very unfortunate about the leg...that sucks...you however are a king for offering your services of use of all data.

Kudos!

 

[Jake_IN]

Could i get everything for a 1991 F-250 4x4 7.3 E4od? Also stay on the road to recovery.

 

[LCAM-01XA]

Brimmstone, sorry to hear about your accident, hope you recover quick and are able to get back on two wheels again. Whenever you have a chance, can you please locate me the turn-signals and hazard lights wiring diagrams for my '90 F350 IDI with factory towing package? It's for my big-truck turn-signal switch install project, the switch I picked up has only four wires and my factory switch has seven, I'd like to know where each of those seven goes before I start tearing things down. Thanks!

 

[Brimmstone]

Brimmstone, sorry to hear about your accident, hope you recover quick and are able to get back on two wheels again. Whenever you have a chance, can you please locate me the turn-signals and hazard lights wiring diagrams for my '90 F350 IDI with factory towing package? It's for my big-truck turn-signal switch install project, the switch I picked up has only four wires and my factory switch has seven, I'd like to know where each of those seven goes before I start tearing things down. Thanks!

I have the diagrams but I need an email to send them to.