Noiseydiesel
Full Access Member
So, in the process of putting this toy together with some '03, 3 link Superduty springs and trying to get the track bar installed.
Now according to Skys off road Design, the track bar is supposed to be level with the front axle. When I do that the track bar is about 8-1/2 inches below the bottom of the engine bay cross member.
This set up is 3900# rated front springs and might just have a hella' arc to them and adding to the height problem.
Without putting this all together, I suspect the measurement to the top outside of the front wheel fender (just above the tire) will be right around 39 inches. A bit higher than my young wife who will be 70 on May 26th might appreciate.
The current problem is how /what might I need to make a track bar work on this toy.
Having gained about 7 inches in ride height from stock is something I might look at later.
Thank you in advance for the responses.
Now according to Skys off road Design, the track bar is supposed to be level with the front axle. When I do that the track bar is about 8-1/2 inches below the bottom of the engine bay cross member.
This set up is 3900# rated front springs and might just have a hella' arc to them and adding to the height problem.
Without putting this all together, I suspect the measurement to the top outside of the front wheel fender (just above the tire) will be right around 39 inches. A bit higher than my young wife who will be 70 on May 26th might appreciate.
The current problem is how /what might I need to make a track bar work on this toy.
Having gained about 7 inches in ride height from stock is something I might look at later.
Thank you in advance for the responses.