jka1963918
Registered User
A year ago had a problem with f-22 fuse blown ( diagnosed on this forum by bismac1 ) turned out to be a bad positive cable end on driver side battery. The drivers side hub bearing went out and truck sat for about a month and wouldn't start. Pulled both batteries and had them load tested, both tested good. Cleaned all battery terminals put it back together, still no start. Took the red small wire on the passenger side off and cleaned it and put back on terminal and it started. Pulled it in the shop and fixed front end, starting the truck several times while it sat. Let a week go by with no starts and now won't start again. Lights on dash come on but doesn't click or anything. Cleaned all ends and got underneath and cleaned connections on starter. Still nothing, but can turn on key and jumped across starter and it started. So I'm getting hot to the switch and it completes circuit to start truck but will start from seat. All fuses are good. At first I thought it might be the transmission safety switch got underneath dash and held up on shifting arm doesn't help. Any ideas would be appreciated.