11-11-16 All remaining parts were deemed to not be worth keeping and have been scrapped, and as such are no longer available. Thank you!
Leaving the rest unedited for posterity, but moderators can lock this thread if they so wish.
Hello!
I mentioned this in another thread...and, today, I finally had a chance to pull this stuff out of storage to take pictures of it.
Over the years, I've been collecting red bricknose interior trim pieces. I've decided that I'm going to go in a different direction with my truck, and decided to liquidate my red interior collection. I know that bordello red isn't the most popular color honestly, I thought about just throwing it all away, but I'd rather see these parts go to good use, if anyone can make use of them. Would prefer local pickup, and I should warn you that shipping is probably not going to be cheap, especially for the door panels, but everything here is available for the cost of shipping.
Some parts are slightly different styles, but everything should fit a 1987-1991 Ford full-size truck.
If no one on OB has expressed interest by the end of the night on Sunday, June 7th, I'll do a post on Craigslist...and, if no one's expressed interest at all by the end of the month, I'll probably just throw it all out. But, again, I'd rather see the stuff put to good use, if anyone wants them.
So, here's what I have:
A set of two door panels, from a 1987 XLT with power locks and windows. Note that the armrest on the driver's side is in pretty bad shape. The lower panels came off the same truck.
SOLD! A driver's side door panel from a late bricknose XLT with power locks and windows. This has the full cloth piece and the under-armrest pocket. Unfortunately, the parts truck I grabbed this from didn't have the passenger's side, so this is all I have.
An ashtray lower piece. There's surface rust on the inside, and it's pretty obvious this came out of a truck driven by a smoker, but I think it'll clean up to the point of being acceptable.
Two gloveboxes. The right side hinge is broken on one of them, and the tab that keeps the glovebox from falling all the way out is broken on the other one. However, it looks like you can separate the dash-color piece from the black inside part, so I think you could make them into one good glovebox if you so wish:
SOLD!Two right side A pillar covers. One of them has a small chunk missing, but I don't think it's readily visible once installed.
SOLD!Two left side A pillar covers; look to be in good shape.
A fuse box cover; looks like it's in good shape overall.
More in next post.
Leaving the rest unedited for posterity, but moderators can lock this thread if they so wish.
Hello!
I mentioned this in another thread...and, today, I finally had a chance to pull this stuff out of storage to take pictures of it.
Over the years, I've been collecting red bricknose interior trim pieces. I've decided that I'm going to go in a different direction with my truck, and decided to liquidate my red interior collection. I know that bordello red isn't the most popular color honestly, I thought about just throwing it all away, but I'd rather see these parts go to good use, if anyone can make use of them. Would prefer local pickup, and I should warn you that shipping is probably not going to be cheap, especially for the door panels, but everything here is available for the cost of shipping.
Some parts are slightly different styles, but everything should fit a 1987-1991 Ford full-size truck.
If no one on OB has expressed interest by the end of the night on Sunday, June 7th, I'll do a post on Craigslist...and, if no one's expressed interest at all by the end of the month, I'll probably just throw it all out. But, again, I'd rather see the stuff put to good use, if anyone wants them.
So, here's what I have:
A set of two door panels, from a 1987 XLT with power locks and windows. Note that the armrest on the driver's side is in pretty bad shape. The lower panels came off the same truck.
You must be registered for see images attach
You must be registered for see images attach
SOLD! A driver's side door panel from a late bricknose XLT with power locks and windows. This has the full cloth piece and the under-armrest pocket. Unfortunately, the parts truck I grabbed this from didn't have the passenger's side, so this is all I have.
You must be registered for see images attach
An ashtray lower piece. There's surface rust on the inside, and it's pretty obvious this came out of a truck driven by a smoker, but I think it'll clean up to the point of being acceptable.
You must be registered for see images attach
Two gloveboxes. The right side hinge is broken on one of them, and the tab that keeps the glovebox from falling all the way out is broken on the other one. However, it looks like you can separate the dash-color piece from the black inside part, so I think you could make them into one good glovebox if you so wish:
You must be registered for see images attach
You must be registered for see images attach
SOLD!Two right side A pillar covers. One of them has a small chunk missing, but I don't think it's readily visible once installed.
You must be registered for see images attach
SOLD!Two left side A pillar covers; look to be in good shape.
You must be registered for see images attach
A fuse box cover; looks like it's in good shape overall.
You must be registered for see images attach
More in next post.
Last edited: