Search results

  1. Nick382

    Parting out 2003 6.0 f250 4x4 xlt

    I'm guessing the fire destroyed the factory air intake system?
  2. Nick382

    92 f350 idi turbo intercooled KELDERMAN US gear

    Is the low price a regional thing? I feel like that's a reasonable price. Seems like this would bring more money in Ohio. Anyway! GLWS Sent from my iPhone using Tapatalk
  3. Nick382

    Truck REFUSES to charge after 6.0L GP harness install?

    I didn't actually check anything on the motor after I pulled the turbo parts and IP. I am shamelessly regurgitating what the PO told me. It's possible it's an IDIT block; but I seriously doubt I would have gotten the price I did if it were. Seems those turbo heads are desirable. If it were me...
  4. Nick382

    Truck REFUSES to charge after 6.0L GP harness install?

    Just for the record, I believe that's a NA block that had a factory turbo kit added to it. Not sure that changes much with your plans but is worth clarifying. Sent from my iPhone using Tapatalk
  5. Nick382

    7.3 idi radiator leaking, sourcing a replacement

    Bought a napa water pump today. Following in the footsteps of towcat with a Murray radiator. Sent from my iPhone using Tapatalk
  6. Nick382

    7.3 idi radiator leaking, sourcing a replacement

    So the radiator appears to be leaking! Coolant pools up inside the lip of the bottom tank and drips from the passenger side of the core support. Once I park, there was a tiny amount of steam. I was hoping it was being blown from the water pump, but now I'm guessing they're both contributing...
  7. Nick382

    ATS 093 Turbo & SD intercooler install + exhaust recommendation

    That make a lot more sense than trying to reinvent the wheel! Even that powercore filter system doesn't seem sized for initial restriction flow rates. Seems like 12"-16" of h20 is closer to the maximum cfm. I'm not saying it's insufficient at all, obviously it was engineered that way for a...
  8. Nick382

    ATS 093 Turbo & SD intercooler install + exhaust recommendation

    I can see that. Do you have any suggestions for a middle of the road filter housing? I'm trying to incorporate a cowl intake and eliminate the ATS airbox at the same time. But I don't really think there's room for a six inch hole... Sent from my iPhone using Tapatalk
  9. Nick382

    ATS 093 Turbo & SD intercooler install + exhaust recommendation

    So I jumped head first into the air filter rabbit hole. Decided I wanted a Donaldson with a peak flow around 900cfm. Problem with that is the size! That's ignoring the 6 inch inlet and outlets. Am I missing something here or are commonly used intakes very restrictive? Sent from my iPhone...
  10. Nick382

    R&D idi issues?

    This was an initial concern for me when I bought an IP and injectors from Justin. At times I thought I could have taken my business elsewhere, and had products faster. That might be true, but any time I had a question throughout my entire repair/assembly or concern about a product, Justin took...
  11. Nick382

    Antarctic IDI Build

    What type of boost controller did you end up ordering? Sent from my iPhone using Tapatalk
  12. Nick382

    ATS 093 Turbo & SD intercooler install + exhaust recommendation

    You guys are a bunch of enablers. In other news, I found my mysterious coolant leak! The water pump decided to be the slow and silent type. Was much less apparent during the winter months but it only seems to leak during engine cooldown. I really should have changed it when I replaced the...
  13. Nick382

    ATS 093 Turbo & SD intercooler install + exhaust recommendation

    I'll look into that! Friend of mine is trying to talk me into adding a winch. Sure would have helped when I got the truck stuck on ice. Sent from my iPhone using Tapatalk
  14. Nick382

    Fair price for a 1994 idi factory turbo

    $8600? No wonder the good ole state of Ohio was raising eyebrows at my $1200 dollar purchase price. That gives their average sale price some basis in reality! Sent from my iPhone using Tapatalk
  15. Nick382

    2018 Rally Route/Convoy Thread

    I'm around 5 hours away myself. I feel your pain no mufflers Sent from my iPhone using Tapatalk
  16. Nick382

    ATS 093 Turbo & SD intercooler install + exhaust recommendation

    Waiting for the next batch of intake hats now. Is there a preferred kit on eBay that has good boots? I see the hump boots being used often. However have read complaints about the cheap boot quality. I also intend to use the superduty pipes I already have. 3 inch seems like the way to go...
  17. Nick382

    7.3 idi no start when warm

    VSS and pickup. One in the differential, other sensor on driver side of the transmission. If auto, check fuses under hood. Sent from my iPhone using Tapatalk
  18. Nick382

    Misc IDI parts and filters

    I noticed your ad is still up. I'll get a hold of you soon. Sent from my iPhone using Tapatalk
  19. Nick382

    Why you should only centrifuge wmo

    So... how bad does it actually smell while running? I've heard Bio can smell like French fries, but I imagine that concoction smells unpleasant. Sent from my iPhone using Tapatalk
  20. Nick382

    new oil cooler assembly - source ?

    There is one being given away in the free section. Might be worth picking up if you suspect damage. Sent from my iPhone using Tapatalk
  21. Nick382

    7.3 idi no start when warm

    Matter of time before it leaves you stranded. Good luck! Sent from my iPhone using Tapatalk
  22. Nick382

    Two 7.3 engines

    I'll pm you. Sent from my iPhone using Tapatalk
  23. Nick382

    new oil cooler assembly - source ?

    I had the exact same problem with mine. Tried OEM gaskets with (and without) RTV, also tried aftermarket. I got tired of draining 11 gallons of coolant and 2.5 gallons of oil for a silly paper gasket. I took both cooler heads to a machine shop, and sure enough I had a low spot in the front...
  24. Nick382

    Dual mass flywheel for early PSD

    This flywheel sold on eBay. It's going to cost a fortune to ship! [emoji23] Sent from my iPhone using Tapatalk
  25. Nick382

    Picture of bricknose intercooler

    Glad to see you got it installed! I'm guessing your truck hard the turbo in place before? I wish I had time to install my new setup Sent from my iPhone using Tapatalk

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,996
Members
26,589
Latest member
tke395

Members online

Total: 867 (members: 1, guests: 866)

Share this page

Top