Search results

  1. cpdenton

    7.3 Part needed

    I need one too, been running for three years without it, but mine is 2 wheel drive and is never off the pavement. I haven't had any trouble so far, but wouldn't think of it if it were ever off road. Still looking for one though.
  2. cpdenton

    F & R fuel tank indicator light or LED

    Here is a photo of the wiring diagram of a 92 model. I assume many other years are similar. Seems like you might be able to tap into the reversing positive powering the motor(on the left side of the diagram). Someone else smarter than me might have to figure out what size resistors and/or...
  3. cpdenton

    Champion radiators SUCK!!!!

    So, what is the root cause of electrolysis? What can we do to avoid problems like this?
  4. cpdenton

    WTB 93-94 SERP SET UP

    Do you need all the accessories, or just brackets?
  5. cpdenton

    Harland Sharp rockers for the IDI

    Uhhhh. That ain't gonna cut it. Keep us updated as to the outcome here.
  6. cpdenton

    Broken Vacuum Piece

    If it had a c6, it will have one. Some 7.3 trucks had c6 and some have e4od, which are electronically controlled and they do not have them. Post over in the marketplace forum a wanted to buy, or search through some of the posts there. A few people are parting out some trucks, you never...
  7. cpdenton

    Broken Vacuum Piece

    Yeah it is. See the broken off nipple inside the hose in that one picture. That is the vacuum regulator valve. Vrv for short. Mimics the vacuum manifold pressure in a teaser so the transmission will know how hard you are on the throttle. Very I,portent piece, and no longer in production...
  8. cpdenton

    Trans question

    Solenoid pack is different too. If it were me, I wouldn't start taking apart a good running turbo idi with a d60 to keep other trucks on the road. Unless, the body is screwed. Buy that truck, drive it u till the wheels fall off, keep looking for a transmission for your stroke.
  9. cpdenton

    electrifying engine block while painting?

    Full of :number2 If you have a negatively charged gun, and a positively charged surface, like in powdercoating, but nothing for regular painting. They don't electrify the fender when they paint it......
  10. cpdenton

    Flexplate to crank bolts

    I hope you have some luck finding one. I have a set, with the spacer, but just don't want to break up the matched set. On another note, when you do go to install these, make sure you use thread sealant on them. Oil will leak through the threads as the crank is tapped through to the...
  11. cpdenton

    Flexplate to crank bolts

    Do you have the flexplate spacer? And I will assume since you say flexplate, this is for a flexplate for an e4od.
  12. cpdenton

    Marker Lights Stay On

    You didn't change out to LED lights did you?
  13. cpdenton

    7.3 turbo boost gauge

    You will love the pump and injectors. What turbo do you have? When I say intake hat, you know what I mean right? There will be a 1/8th npt port in most any intake hat for the big 3 kits. That is where you tap into the boost pressure.
  14. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

  15. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    Thanks for all the info guys! The excursion was really nice, but it was missing the third row seat. No go for us. Need the seating. I know I could have probably got one rounded up, but as nice as the truck was, it wasn't our truck. It started good, and was totally unmolested. Still had...
  16. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    Just tell her it's like a suburban, but made by the right company!
  17. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    Btw snicklas, thanks. Says it has 103,000 on it, and vin check says it lived in California until this dealer bought it from a pm auto auction in Texas. No going to tell them I am coming, so it should be good and cold when I get there.
  18. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    Man, I have three acres and a shovel. Grass grows back fast too......
  19. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    Fairly familiar with the sound of the 6.0. Our church buses are both 05 6.0 e450 chassis. One is in the shop now for an oil cooler and EGr cooler. They have plenty of power to move the 29 passenger buses! This is a dealer sale. We shall see. Looking at and 07 expedition EL as well...
  20. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    And I am getting the 7.3 is the only one that has it?!
  21. cpdenton

    Looking at an 05 6.0 excursion. What to look for?

    Post explains itself. I know nothing about the 6.ohno. What do I need to look out for? Thanks
  22. cpdenton

    finally! the long awaited engine build.

    Those the turbo rods?
  23. cpdenton

    Hose to Lift Pump: How Did They Do This?

    My duralift is mounted on the frame rail directly beneath the drivers seat. Every now and then, under full load, the fuel filter light just starts to come on. I'm ok with it. Just mount it up closer to the front and it should work fine.
  24. cpdenton

    OBS clip....or leave it a brick nose??

    Headlight options are way better for an OBS. Also, the intercooler thing, it was very easy to mount behind the grill. Just took out the vertical support in the center, and trimmed a little plastic off the grille, and it fit well, even in front of my ac condenser.
  25. cpdenton

    Cooling issues!!!! Cannot chase this one down!!!

    Search for champion cc1165. That's the three row Champion sc1165 is the 4 row.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,996
Members
26,589
Latest member
tke395

Members online

Total: 863 (members: 1, guests: 862)

Share this page

Top