turn signals and fuel gauge issues

[bowhunter13]

got this truck running good now, but i have NO turn signals or flashers. i have power at fuse panel but nothing happening. changed out the flasher deal, nothing

fuel gage reads when in park, put it in gear and it jumps all over the place..

oh yeah headlights work in High only.. have to test the plug for low beams side .

any ideas?

running lights all work perfect

 

[79jasper]

Sounds like headlight switch is bad.
But still sounds like an issue with the turn signal/high beam switch also.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[bowhunter13]

if headlight switch is bad , will it affect turn signals?

high beam works just fine off turn signal arm.

 

[bowhunter13]

just checked the headlight plug. i have power to 2 of the prongs. power at 1 with headlights, power to other with high beams. i think the center one is ground.

no turn signals and no brake lights. there is power at the peddle and at the e brake connector.

 

[79jasper]

When my headlight switch went, I drove home with high beams only. No markers or anything else.
They can fail any way. Just pull it and take a good look at the plug. Quite common.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[bowhunter13]

switch looks brand new.. im gonna pull it and see if i find any issues. still cant figure out the brake lights or fuel gauge. i am wondering now if i have a ground issue.

 

[79jasper]

Could very well be.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[bowhunter13]

anywhere i can get a wiring diagrahm for a 94 F 350??

changed all bulbs, headlights work, back up and running lights

NO turn signals and NO brake lights.

any suggestion would be great.

went to brake booster in eng bay, the sensor has power in and power out. both fuses are good in that harness as well.
power at switch at peddle and the E brake switch.

 

[bowhunter13]

anywhere i can get a wiring diagrahm for a 94 F 350??

changed all bulbs, headlights work, back up and running lights

NO turn signals and NO brake lights.

any suggestion would be great.

went to brake booster in eng bay, the sensor has power in and power out. both fuses are good in that harness as well.
power at switch at peddle and the E brake switch.