The HayWagon

[snowracer]

im new here so will show you all my rig.

i have some plans comming up that i will have some questions about and have already found lots of good info on this site

truck started life as a 1990 f250 reg cab long box with a 7.3idi 5speed combo.

specs now are
7.3idi with modified injection pump (turbo coming soon)
5 speed zf and np203/205 tcase set up
dana 60 front with locker, 4.56 gears, 4340 chromo shafts and slugs
10.25 rear with detroit and 4.56 gears, welded axle tubes and disc brakes


this is the best picture i have of the truck after i got it, this was about 6 mounth later and i had but on a 3inch body lift and 35 BFG ATs

You must be registered for see images attach

then i got a set of 39.5 iroks but they were bad so only ran them for a short time

You must be registered for see images attach

the truck got a coat of black paint and some big ugly stacks and some new 38.5 boggers

You must be registered for see images attach

ran i like that for a while till i wanted to make it a better wheeler so cut it up and did a new lift with new bumper and got rid of the stacks

You must be registered for see images attach

once again ran i like that for a while till the tires were done so got a new set of 39.5 boggers on some beadlocks

You must be registered for see images attach

some wheeling pics of this set up as i wheeled it like this for a year or so

You must be registered for see images attach

You must be registered for see images attach

after this point the truck was no longer my daily driver so i got a little crazy with it. body was in real bad shape so got some new sheet metal for it and tossed the box in favor of some tube

You must be registered for see images attach

You must be registered for see images attach

did a high steer set up with hydro assist

You must be registered for see images attach

You must be registered for see images attach

snow performance water **** kit

You must be registered for see images attach

You must be registered for see images attach

 

[snowracer]

then did 64inch chevy springs inboarded in the back of the truck and cut 12inchs of frame off

You must be registered for see images attach

had to try out the new rear springs

You must be registered for see images attach

You must be registered for see images attach

did dove tailed box sides on the back, took 16inchs out of the box side

You must be registered for see images attach

You must be registered for see images attach

once again wheeled it like this for a bit but i had some so once again the crazy in me took over and this happened

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[snowracer]

went wheeling again after the cage was done

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

next up was welding the axle tubes in the stearling and disc brakes

You must be registered for see images attach

lots of paint

You must be registered for see images attach

You must be registered for see images attach

new traction bar

You must be registered for see images attach

You must be registered for see images attach

more paint

You must be registered for see images attach

You must be registered for see images attach

home made pedal pads that work great

You must be registered for see images attach

 

[snowracer]

new trans and tcase cross member frame set up that i did this summer

You must be registered for see images attach

and now for some more wheeling pics from this year as pics are fun

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

at the local mud bogs this year

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[snowracer]

more

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

and i really love snow wheeling so have made it out a few times this year

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[jonathan]

that is a bitchen truck dude

 

[Brianedwardss]

I'm still picking my jaw up off the floor after looking at all your pics.

 

[lotzagoodstuff]

Awesome rig

Nice job taking all the pics as you built it over and over again.

 

[1994IDI]

I... love... pictures...

Nice work. Welcome to OB

 

[riotwarrior]

AS I said on BC4x4, hell of a nice rig. can't wait to see it in person.

And WELCOME to the absolute best IDI sight on the planet...or for that matter...in the universe!

 

[MidnightBlade]

wow

 

[93_444idi]

nice rig! i would definitely make a turbo you're next project on it tho! i thought mine was a dog NA with 36s, turbo isnt that expensive of an upgrade and its a huge difference.

 

[oldmisterbill]

Nice - something to be proud of. A proud & Play rig!!

 

[flareside_thun]

Gawd I love pics....and that truck... any more pics??????

 

[idi traveler]

All I can say is, "Cool rig!"

Oh yeah, welcome to "THE" best site on the net!