So the weather warmed up today and I got bored enough to do my fuel tank swap and fix that pesky vent valve that was causing me to get pissed at the pump.
I bought new tanks from autopartsdeal.com and new straps as well. Went to the local ford dealer and bought new grommets for the roll over valves to. and over to murdocks for fuel transfer hose, screen, and a copper 90 degree bend, some other small stuff as well. So here are the pictures of what I did
1 - 26512 Hose from Carquest. ($30)
2 - 3/4" 90 degree copper elbows ($3)
1 - 14' section of fuel transfer hose with static wire ($24)
1 - tube of permatex ($5)
1 - 19gal side tank and straps st05 ($100)
1 - F6TZ9B076AA grommet ($7)
1 - Roll of aluminum bug screen ($8)
Once back in the truck I ran the vent hose up along side the fill neck hose and routed it thru the holes where my old 7 blade connector was mounted on the bed and turned it down on the inside of my bed liner.