79jasper
Chickenhawk
It's called a injector cup for a reason. Pulling the glow plug isn't going to tell you much of anything, besides coolant getting into the cylinder.
You pull the injectors to do it right. Some drain the coolant down before pressurize the system, then use soapy water to spray the cups. Countless youtube videos out there.
Everyone always pulls the "i don't have time." Do you have time to replace the engine when you bend a rod?
Sent from my SM-N960U using Tapatalk
You pull the injectors to do it right. Some drain the coolant down before pressurize the system, then use soapy water to spray the cups. Countless youtube videos out there.
Everyone always pulls the "i don't have time." Do you have time to replace the engine when you bend a rod?
Sent from my SM-N960U using Tapatalk