A48WillyzGuy
Registered User
So, I've been looking around but haven't had any luck with this. I'm fairly certain that my clutch rod is too long, and not letting my pressure plate fully engage the clutch disk.
It appears that the earlier trucks have an adjustable rod...
http://www.ebay.com/itm/ATP-FX-231-...or-Ford-F-100-F-150-F-250-F-350-/291993403358
My '93 does not.
Does anyone know if the older, adjustable rods will fit the newer pedals/masters?
I also wonder if I may have put on my pivot arm incorrectly when I did the manual swap. I received no instructions with my pedal assembly, so I just put this arm...
http://www.ebay.com/itm/191706148667?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
on the splined shaft where the clutch pedal naturally rested. Is there a better way of doing this? I'm a little leery or trying to remove this piece and re-index it because, as shown in the link above, it comes without any splines. So, I cranked the heck out of it and forced it onto the crossover shaft until I couldn't crank it anymore. It may not come apart very nicely.
I appreciate any insight you guys can give on this!
It appears that the earlier trucks have an adjustable rod...
http://www.ebay.com/itm/ATP-FX-231-...or-Ford-F-100-F-150-F-250-F-350-/291993403358
My '93 does not.
Does anyone know if the older, adjustable rods will fit the newer pedals/masters?
I also wonder if I may have put on my pivot arm incorrectly when I did the manual swap. I received no instructions with my pedal assembly, so I just put this arm...
http://www.ebay.com/itm/191706148667?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
on the splined shaft where the clutch pedal naturally rested. Is there a better way of doing this? I'm a little leery or trying to remove this piece and re-index it because, as shown in the link above, it comes without any splines. So, I cranked the heck out of it and forced it onto the crossover shaft until I couldn't crank it anymore. It may not come apart very nicely.
I appreciate any insight you guys can give on this!