cummins superstar
Registered User
i wanna know exactly how hard it is to put a p-pump on a 24 valve or can a 24 valve head be put on a p-pump 12 valve
24 valve p-pump swap
- Thread starter cummins superstar
- Start date
cumminsISB
Registered User
- Joined
- Nov 25, 2007
- Posts
- 2
- Reaction score
- 0
Good Question....
I dont know exactly how hard it is but i do know that max psi performance sells a kit. It says it includes a new timing cover. So that in it self is quite involved. Cables should not be a problem once the APPS sensor is off. the kit comes new lines because the injectors are on the opposite side on a 12valve. other than that one hot wire to the shutoff solenoid and i would think that you will be up and running. i dont know how you would keep the check engine light off because the vp44 would be disconnected. but other than that. IT is somewhat involved
I dont know exactly how hard it is but i do know that max psi performance sells a kit. It says it includes a new timing cover. So that in it self is quite involved. Cables should not be a problem once the APPS sensor is off. the kit comes new lines because the injectors are on the opposite side on a 12valve. other than that one hot wire to the shutoff solenoid and i would think that you will be up and running. i dont know how you would keep the check engine light off because the vp44 would be disconnected. but other than that. IT is somewhat involved
Nasty24v
Rollin Coal.
I want to know more about this. I just signed up for this site. ANyone know who who Makes a full install kit?
