Harbor Freight has 1/2 breaker bar 4 ft long if your really want to make it easier for yourself,. Or MAC tools has a 3 ft. 1/2" flex head ratchet for about 160. That's what I use...
If your having this Mny problems with your wiring, Maybe you should buy a painless wiring harness fo your truck and rewire it. About 400 for a complete chassis wiring harness. Jus say'n...
Believe it or not, Sometimes when you replace the hub assembly and you have all new studs, the old lug nuts are damaged from the years of impact use on them, I always replace the nuts with new ones. The old nuts threads are slightly "pulled" and won't thread on properly the right way and they...
Running Toyo Open Country RT's. Can;'t hear any tire howl or whine inside the cab with the windows down and I have Kenda Kleaver RT's on another set of wheels that are a good alternative. Toyo's about 1500 to 2000 set of 4 and Kenda's are less Than a thousand on eBay. yes, I am running 35's.
I've busted ARP studs at torque down. Sometimes you get a flawed one and this is the result. Unfortunately you have to tear the head off and redo the gasket. rockauto.com is where I get a lot of my parts. But there is also bay, amazon and several other places you could acquire needed supplies.
get a aftermarket cat filter kit. Comes off your fuel filter housing and remote mounts and uses the cat filter. not sure of the micron size, but way better filtration. I use them on my cummins Dodge's. all 3 of them.
I have a 94 and I did all that you did and then I had the p pump fail and that's when I found the tappet cover was leaking like a sieve. it is a rubber/silicone gasket that goes around the side/tappet cover and has bolt seals for the bolts that hold it to the side of the engine. I replaced the...
The "clock spring" in your steering column behind the steering wheel needs to be replaced. rockauto.com part number - WVE/AIRTEX/WELLS 8G1031. $165.00 plus shipping
I'd trade up in a ♡ beat!! The cummins is a way better engine! the extended cab is more roomy for taking things and friends/family with you. so you will lose that. But I have 2 cummins single cab and 2 cummins extended/quad cab. All are long beds, 8ft. the extended cab long bed is harder to...
I replaced the head gasket on my 94 6BT. Pretty straight forward. Get the Chilton manual for your truck and a engine hoist. the head weights 189 pounds. There are 2 rubber plugs in the wiper transom valley right over the back of the head, remove them as this will allow you to pull the head...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.