94 F350 7.3 IDI
There is a wire going into the top of the fuel filter housing and I have air and diesel bubbles around it. What holds this wire on and how do I get it off. I don't want to break anything.....yet. If the housing is cracked is there a better setup than stock?
Well, I guess it's time to learn how to rebuild a Bosch VE injection pump. It's leaking more than it's burning. Have any of you guys ever rebuilt your own pump? I've got the seal kit and I've got this link VW_Pump_Rebuild . The link is for a pump from a 4 cylinder but should be about the same...
Well I got the Ramcharger on the road with the Cummins installed. I've been driving it for about a week and enjoying the crap out of it. I get allot of looks from people. But now the rear main seal is leaking like a sieve. I've been told that a plugged draft tube will cause crankcase pressure...
All right, Ive been beating around the bush on this for a few months now, That's enough screwing around thinking about this project. It's time to crap or get off the pot. Yesterday 11/10/2007 I made the decision to pull the Ram out of service and get started on this conversion. I'm going to put...
I finally tracked down the source of the death wobble in the wife's truck. The part is called "axle pivot bushings". Evidently the Twin I-Beams are considered axles by Ford.
There is a special puller and installer tool that is made for this bushing. I opted not to buy it. FYI, If I ever have...
Long story that I'm gonna try to make short.
Fuel pickup tube broken off in both tanks.
Sucking air from somewhere.
So, I dropped the front tank and did a pick up tube mod by adding a few inches of fuel line in the tank with a Vee notch at the end so it wouldn't suck to the bottom of the...
O.K. , I’ll start with a little information.
1994 F350 7.3
dual tanks
electronic fuel selector valve
Fuel pick up tube mod done to the front tank
the following condition existed before the pick up tube mod was done and yes, the bottom of the tube was broken off.
The truck has the...
I'm in the process of adding a single stack to my truck. The horse's heads stick out of the left side of the trailer and the black smoke will go down the right side.
I have fabricated and installed all of the mounting brackets, base and fittings along with the purchased stack. All that is left...
I'm gonna add stacks to my '90 D250. I will be fabricating everything except the chrome stacks and was wondering if there was any reason that aluminum tubing should or should not be used.
Over the last few months the wife has called me several time to tell me that she was driving along and the truck would suddenly die. But,she always managed to get it started again. I have on several occasions driven the truck for the weekend and could not get the truck to duplicate the problem...
I have a 1990 D250 (see sig). I noticed it was leaking diesel a few days ago and popped the hood to have a look. It is leaking fuel at the front of the injection pump near the top. There is a tube that goes from the fuel shut off solenoid to the top of the pump near the front. The fuel seems to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.