I have an intermittent starting issue with 95 7.3L manual transmission. I replaced the clutch/starter safety switching thinking that was the problem as when I got it off and looked at it it was sticking open. When I am pushing the clutch to the floor to start nothing is happening when turning...
I have 1995 7.3 manual transmission I believe that the previous owners may have used 10w-30 or 40 in it. Can I switch back to an actual transmission fluid without damaging anything? Also is there a filter in this? I know that automatic transmissions have a filter but what about the manual?
1995 Ford found one at pick-n-pull for $6. Wish I would have checked here first. Next project is fuel tanks. Having issue with rear tank since lent to a friend and he ran out of fuel. Thinking shower head is clogged or collapsed. Would love recommendation on procedure before tackling this one.
I cannot get my wipers or washer to work. Is there an in-line fuse I might be missing? Backstory, My turn signals were not working and listened to General Mechanic friend swore it was the signal switch, (turns out was just the bulbs), so much for that advice. Anyway I replaced the switch and now...
Got it started but glow plug relay show voltage on 3 terminals when running. Is that normal? I was getting nothing on the terminal that has 2 wires connected to it, which I assume is the glow plug wires.
So I think my relay maybe burned out. Truck will crank and white smoke comes out of exhaust pipe. Back story. I lent the truck to a friend and he ran it out of fuel. Since I have changed the filter but was giving trouble going down the road would sputter.
2 Questions
1. If my relay is burned...
I have a 1995 7.3L and am missing the intake to the air filter part number F5TZ9C675A. I have tried ebay and couple other replacement part sites but no luck. Can anyone help or send me off in the right direction?
Happy to report I found the leak, (thanks to all the experience on here) its dripping from the sensor. Can anyone tell me the correct size plug to put in its place? And should I put something (what) on the threads to prevent leaking?
I am embarking on a transmission service journey. 1995 7.3L 5 speed manual transmission. I have found several different types of fluid that are recommended Mercon ATF, synthetic as one. Questions? I have not done this to a diesel or a manual trans so forgive of my ignorance thats why I am here...
I have replaced, pump, filter, rebuild kit from Diesel O-rings. It had the leak when I bought it a year ago thought it was the pump, wasn't now I realize but have a spare incase this one goes out. Thanks for all the helpful insight and suggestions. Is it better to plug it off or just replace the...
I have the same issue after I replaced the pump and am not sure where this is coming from. Where are the things I can bypass or eliminate, diagram or picture greatly appreciated. I am a pull off and replace person, none mechanic so not sure. I am pulling the bowl back off tomorrow thinking the...
I have replaced my fuel pump and have a small leak I am having real trouble locating. How many cooper washers are suppose to be in the banjo bolt installation? Are you supposed to have one under the head and up against the pump, meaning 2.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.