Search results

  1. FarmerFrank

    Turbo recommendations?

    Flatbed has been really smokey since it got the baby swamps and a PHP put on it. Gots to thinking maybe it's time to freshen up a turbo as mine looks original (258k).wheel shows signs of age and it has a little bit of play. I have a spare that seems nice and tight but was wondering if one of...
  2. FarmerFrank

    Kent Moore timing meter

    I have a Kent Moore meter for sale. It's in working order and has the green colored screen. It is missing the 1/4 line clamp piece. Make an offer, I no longer need it.
  3. FarmerFrank

    WTB 3208 Injection Pump

    No this isn't for some crazy build, it's actually for a 3208. My White 4-180 quit running on me, pump is full of rust. Preferably a pump from an agriculture use but I can change the governor housing if it's from a truck.
  4. FarmerFrank

    So this happened yesterday....

    My drivers side up pipe blew out. Under a hard pull I could hear a slight exhaust leak, I figured it was a manifold. Got to the top of a hill, laid into the GO pedal and it went "tick tick tick BANG BANG BANG BANG!" Sounded like I put a rod through the oil pan. What a PITA to take out.
  5. FarmerFrank

    F-Superduty parking brake

    Any one interested In a ZF parking brake housing? Seems to be in working order. I had the drive shaft off the truck it was on and could stall the engine with it so I think it's good? Make an offer. Pics to come later. Thanks Frank
  6. FarmerFrank

    What it be??

    SD electric pump outlet fitting threads.... So I got my SD electric pump for The stroke swap. Everything I read says the outlet fitting is m10x1 I am going to have #6 hydraulic hose from pump to filter, filter to engine Ordered my down pipe and a m10x1.0-6an fitting from summit. M10 is...
  7. FarmerFrank

    7.3 Idi running engine

    Bought a 90? Parts truck. I put a pump on it to make it run, PO has the injection lines all messed up and #7 injector is cross threaded. No oil in coolant, no coolant in oil. I do not know the miles but there is no blow by, it has air intrusion but it still starts pretty good. I have a video...
  8. FarmerFrank

    6.9 head studs

    ARP brand, ran about 500 miles $163.52 shipped Thanks Frank
  9. FarmerFrank

    Oil coolers

    I have about 4 oil coolers for sale. Willing to sell heads separate. Make an offer. Thanks Frank
  10. FarmerFrank

    Well here I go...

    Lately my IDI luck has ran out. Can't keep a head gasket glued in. 3 engines within 6 months and it wasn't for lack of maintenance. . I feel I am asking too much out of the ol girls so I decided to go to the dark side.... Powerstroke swap time. The recipient: 94 F350 4x4 auto, factory turbo...
  11. FarmerFrank

    Cleaning out

    Clearing out most of my IDI inventory. You name it, I probably have it. 6.9 and 7.3 injector lines, water pumps, oil pumps, probably a spare or three IP's, accessory brackets. If you need some little part let me know. I also have: 6.9 head studs ran 500 miles Factory turbo kit with banks...
  12. FarmerFrank

    80-91 auto tilt steering columns

    I have 2 columns, both without steering wheels. Both fully functional, very very little slop in the tilt section One is missing the turn signal switch $100 + shipping Other one has a working switch with good cams $150+ shipping Sent from my iPhone using Tapatalk
  13. FarmerFrank

    Any one want to rent me a timing tool?

    So after not being able to find my injection line timing adaptor, or a replacement one, I was hoping some one from the community could help me out. I have the Kent Moore meter, mag pick up and all the wires but my injection line clamp is MIA ( I think it's KIA by now) I recently put a 6.9 in my...
  14. FarmerFrank

    1994 Serpentine set up

    my truck wouldn't hold a belt and I got tired of trying to find the right size and burning my arms every time it'd throw one. so it is not all V-belt. I have all the brackets, power steering pump w/o a reservoir, alternator and base, A/C compressor that i'm assuming is no good but it spins...
  15. FarmerFrank

    83-86 Bullnose Core support

    Rust free for tall narrow rad. Located west central Pa. $200 OBO Sent from my iPhone using Tapatalk
  16. FarmerFrank

    NOS 80-86 speedo

    Bought 2 of these a few years ago when I had plans on restoring my old truck. Guy before me bought a bunch of stuff from a dealership auction. Got one left. Box is in rough shape. Way I figured it, if it was worth 24.50 in 1985 like the box says, I too can settle for $24.50 and I won't...
  17. FarmerFrank

    '94 Sterling SRW 10.25 4:10 LS

    The project truck took a turn for the fat a$$ side, dually rear and flat bed. Truck has 180k on it, I expect the rear to be the same. I can get picture of it and the internals later on. Looks like a 1350 yoke and it should be the long pinion. Comes hub to hub, yoke to pan. $200 OBO to the...
  18. FarmerFrank

    Rear Freeze Plugs

    Correct me if I'm wrong, but there are 2 freeze plugs above the rear main seal plate on the very back of the block right? Inside the bell housing behind the flex plate.... So as I'm putting together a basket case of a 94 factory turbo i Finally got my core support fixed, radiator installed...
  19. FarmerFrank

    Dip stick tube broken??

    Well I found a new one today. After spending 2 hours chasing a HUGE oil leak (6 quarts in 70 miles) I finally found it. I was convinced it was my oil return from the hypermax turbo leaking. It has done that to me before and since the oil was from the passenger side around the starter it made...
  20. FarmerFrank

    Anyone need zf6 parts?

    As always, ill post things on here first and cheaper than eBay. I tore apart a 4x4 zf6 from a v10 the other day. Couple syncros fell into pieces while taking it apart. I have both cases, the center section and the input shaft that I can say is good. Shift forks all show wear. If anyone needs...
  21. FarmerFrank

    WTB oil cooler O rings

    Looking for a set of cooler o rings, thought some one might have a new set laying around. Don't really need the gaskets. Thanks Frank
  22. FarmerFrank

    Walbro electric pumps?

    Anyone here running a walbro electric lift pump? My mr gasket 95gph pump failed. This is the second one lost to WMO. I did some more research and found a Walbro Frc-13 pump. It's a reciprocating piston pump instead of a vane pump like I have been running. Claims on their website says it's...
  23. FarmerFrank

    FS: 1990 hydroboost kit

    Gotta move some parts so I can finish my project.... I have a hydroboost kit from an automatic 1990 f-superduty. Brake booster, both hydraulic hoses, ps 3 port reservoir and automatic brake peddle assembly. No master cylinder The booster has a reman stamp, truck never ran when I had it but...
  24. FarmerFrank

    slowed down. but not out

    As I was picking up a couple drums of oil the other day I realized I haven't stopped in lately here. the good news, the farm truck still see's plenty of WMO. But at rate of 10ish gallons per day I had to do something else so I bought a 2000 TDI with the ALH engine. so far I do enjoy the car and...
  25. FarmerFrank

    FS: Doug Nash DNE2 overdrive box

    Currently bolted on a 2wd c6 New shift motor and switch. Come with everything needed to bolt onto c6. If your truck is an extended cab I'll send the shorter shaft to the carrier bearing. I'll also send it with a fresh bottle of 75w90 syn oil. I think I still have the original wiring but it's too...

Latest posts

Forum statistics

Threads
91,344
Posts
1,130,744
Members
24,143
Latest member
Cv axle

Members online

Total: 320 (members: 10, guests: 310)

Share this page

Top