Search results

  1. 24VChevy

    Thanks RubberFish

    Ya they are a little big, got some smaller tires coming, will make one heck of a smoke show thou. Malcolm
  2. 24VChevy

    Thanks RubberFish

    Thanks for the tires there Bob, just had to stick-em cookoo on the truck now that it is a 2wd creature. Malcolm
  3. 24VChevy

    Buying a 94 whats it take to get it to the same as a 97

    I was refering to the Cam inside the injection pump not the main camshaft. Once you start to want to get into the big HP range then you start to look at the main camshaft. Malcolm
  4. 24VChevy

    99 4x4 5 speed 53 series block cracked

    Buy it and stick in a 12V P pump engine
  5. 24VChevy

    Buying a 94 whats it take to get it to the same as a 97

    Hey Bob, hows the truck, just surfing around and thought I would visit Oil Burners, it has been a while. There are a few more differences from a 94-97 pump, the cam is different, plugers and barrels and rack travel. Like Bob said you can get to where he is at with his mods. (hey Bob need...
  6. 24VChevy

    need some advice/help!

    I hope they put in the new updated fully spined main shaft and 5th gear along with the updated 5th gear nut. If they installed the synco ring on backward for 5th you will get the hard 5th gear engagment also. Best of luck Malcolm
  7. 24VChevy

    Surging 2001 7.3

    There is a warm up valve behind the turbo. It closes to help warm the engine in cold weather. It will cycle off with throttle or stay closed (on) if left idling. You can disable this by unplugging it. It will set a code but not a CEL. The plug is infront of the turbo under the compressor...
  8. 24VChevy

    Speedometer recalculation

    I have done the speedo recalibration (rev per mile pinion factor) with my snap on scan tool. Any shop that has this should be able to do it. You have to go into the ABS modual to access it.
  9. 24VChevy

    Twin Turbo's

    If you are talking about running two turbos paralell it does not work. You have to use two small turbos or it will be a real lag pig. I read about someone trying it and it sucked. If you keep the boost down to a reasonable level under 55 or so you can get away without orings and studs for a...
  10. 24VChevy

    what turbo to run?

    I would go with a BD-Power Super B or a PDR HX 40. I agree with Muddy, running plateless might end up in a run a way engine if your governor pin breaks off. Grind up a 0-100 plate. 700 hp on a hX35, not possible. maybe in a twin set up with it on top, but not alone.
  11. 24VChevy

    2001 dodge down cranks but no start

    Rotor seized in the pump? Crack the injector lines to see if you have any fuel there while cranking.

Latest posts

Forum statistics

Threads
91,346
Posts
1,130,784
Members
24,146
Latest member
Alleycat

Staff online

Members online

Total: 299 (members: 12, guests: 287)

Share this page

Top