Recent content by w4dsb

  1. w4dsb

    7.3L Fuel Filter 'Housing' Replacement

    that epoxy will knock loose with a chisel or just wait a while and it will come off on it's own Mine did!
  2. w4dsb

    Vacuum pump shaft end play?

    find a local bearing supplier and 'im sure you can get the bearings. We use Motion industries where we work and they have found some pretty rare ones for us.
  3. w4dsb

    6.9 water separator valve

    think its on the firewall near the master cylinder
  4. w4dsb

    the new setup...

    wow that's a lot of valves!
  5. w4dsb

    Having a moment...

    i think its backwards. the V goes toward the oil
  6. w4dsb

    Wheel bearing change.

    i have never pressed them myself. just tap them out easily and back in with the new ones
  7. w4dsb

    94 460 mpg

    8mpg when i had my 90
  8. w4dsb

    Fuel and water Sep.

    i like that approach.....i had mine off already so i could look inside and find out where the leak was :)
  9. w4dsb

    Fuel and water Sep.

    its the fuel heater connection , you have to remove the filter head then the inside unscrews and you can get to the connector. it has a o ring on it.
  10. w4dsb

    two guages from one sensor

    He said oil pressure......the pressure would be the same on either side of the tee where did coolant come from?
  11. w4dsb

    two guages from one sensor

    put in a pipe nipple and a tee in the factory sensoe hole then screw the factory sender in to the tee and your aftermarket sensor into the other port of the tee
  12. w4dsb

    Factory tow hitch setup?

    class 3 maybe certainly not a class 5 i don't have a class 4 here to look at for comparison
  13. w4dsb

    A 460 vs. Towing?

    had a 460 and a manual tranny in a 89 f350 dually . it was strong as heck but loved GAS 8mpg
  14. w4dsb

    Electrical Question..

    i could have made a million dollars over the years fixing these shadetree wiring jobs......
  15. w4dsb

    14.5" G Rated Trailer Tires

    "G" is a pretty heavy tire!
Top