Recent content by blackbear

  1. B

    7.3 pwrstk and idi parts

    the cdr valve and tube are sold, thanks-
  2. B

    7.3 pwrstk and idi parts

    x2 new freeze/block plugs $2.00 shipped (ford oem parts for idi) used dps stage 1 injectors $80 shipped (for idi, one is leaky) new comp springs w/ compressor tool pt#910-16 $100 shipped new afe oilless air filter pt#21-30018 $40 plus shipping
  3. B

    reverse engine bog, ticking and...

    actually, after looking at these clips for awhile... on the pass. side, an intake and exhaust valve on the #3 and 5 (one from each cylinder) are opening and closing at the same time. while on the drv side, exhaust is opening and closing with the rest of the exhaust and same with the intake...
  4. B

    reverse engine bog, ticking and...

    i ended up taking both valve covers off the other day and recorded them while running. i re-torqued the bolts but none were loose. i tried to just wiggle the rockers by hand to see if there was any play and they all feel really tight like i would think they should. while running i tried to...
  5. B

    reverse engine bog, ticking and...

    i was under the impression the valves where not adjustable? im going to remove the pass side valve cover tomorrow and take a look. what will i be looking for exactly? im hoping to just find a loose rocker that needs to be re-torqued. if not, what should i look/test for? from reading, it is safe...
  6. B

    Upgrade my IDI or buy a new truck?

    make it easy on yourself and get a newer truck!
  7. B

    reverse engine bog, ticking and...

    So I've got a couple more leaky fuel lines I've seem to have stopped, for now. I also believe to have isolated the ticking to the #3 cylinder. I drove up from oc to la this morning after putting in the seafoam (16oz) with no results. I think I'll leave it a little longer and change the oil when...
  8. B

    reverse engine bog, ticking and...

    SLC97SR5, yes i did remove the TC to replace the leaky seal behind it. i thought i read it needed to be sitting all the way back in the bellhouse to be properly installed, not flush with the front of the bellhouse. i would think with the engine installed it would be where it needs to be? besides...
  9. B

    reverse engine bog, ticking and...

    great info guys, thank you very much for your input! i should have time tomorrow to look things over a little more closely. i too feel it would be one of the lifters from all that ive read. ill dump the seafoam in tomorrow and see what happens. ill let you know what comes about, thanks-
  10. B

    reverse engine bog, ticking and...

    ok, i somewhat see how you mean. i was under the assumption an injector itself might be making the noise? do i need to remove some oil from the engine to add the seafoam or just dump it in? the oil level is right at full. as far as cleaning the connectors for the trans problem, which ones would...
  11. B

    reverse engine bog, ticking and...

    not going away by means off loosening the injectors equates most likely valve train, right? i dont follow the rod bearing comment thought. i havent put the seafoam in yet and was wandering how long to leave it in the case. thanks-
  12. B

    reverse engine bog, ticking and...

    so, i havent gotten any further with diagnosing these problems. i didnt notice any loss in the ticking noise after loosening each injector and finally got all of the caps to stop leaking. the ticking did seem a little louder today, briefly. i did fill the rear tank up the other day while adding...
  13. B

    Ticking/clacking noise!?!?

    this is the link in the email which i was able to view... http://i1352.photobucket.com/albums/q648/bootzzhadiyah/6B299F25-6C99-4C4D-BD8C-C21661A58372-9868-000009FBCAADEF63_zpsead85cc5.mp4
  14. B

    Ticking/clacking noise!?!?

    your video came up in the email notice of your post. i created an account with youtube through a gmail account ive had and was easily able to up load video. then i just copied and pasted the web address in my post. it should just show up in the post. your tick sounds more pronounced then what im...
  15. B

    reverse engine bog, ticking and...

    yes, they were soaked in cleaner and reinstalled. they showed no signs of needing to be replaced with new ones. i didnt get a chance to get anything else done on the truck after this morning...
See more

Latest posts

Forum statistics

Threads
91,333
Posts
1,130,515
Members
24,135
Latest member
m2rtin

Members online

Total: 722 (members: 10, guests: 712)

Share this page

Top