f-two-fiddy
Registered User
DNE 2 OD for C6 With New seals. Has electronics, and Reg Cab 8' box drive shaft.
$700 OBO + ship
PM Me for more info
$700 OBO + ship
PM Me for more info
Last edited:
FS US Gear/DNE 2 Aux OD, W/ C6 adaptor
- Thread starter f-two-fiddy
- Start date
4wd or 2wd?
and got pics?
and got pics?
h2odrx
Anti-O
what he said!
f-two-fiddy
Registered User
I'll get Pix, Gotta go to a Band Concert. They'll be up after 8:00 PM CST
This has a C6 adapter. Dunno if a guy could make it work 4WD
This has a C6 adapter. Dunno if a guy could make it work 4WD
NCheek
Howdy
Wish I had the coin, I'd have my DNe2 UD out in a heartbeat...
If you have an UD all is not lost, just stick a REAL tall rear end in the thing
You can get I think a 3.05 gear set and that would be a lot cheaper than switching the OD unit. You'd be accomplishing the same thing
tractorman86
Registered User
If you have an UD all is not lost, just stick a REAL tall rear end in the thing
+2,
NCheek
Howdy
Yeah, but final drive with 3.55's and .8 overdrive = 2.84, to get that effective with 3.08's I would need to run 37 inch tires instead of 235/85/16's!
f-two-fiddy
Registered User
I rebuilt the wiring harness. It does need a little attention on the main power wire to the control box. Seems to be in great condition. I resealed the case and added new shaft seals. The gears all looked good, no chips, or excessive wear.
tractorman86
Registered User
i wonder if they make an adapter for a ZF-6 2wd? 
f-two-fiddy
Registered User
They do make a ZF5 2WD adapter.
Also, this will work for 4X4, if You purchase the proper adapter. US Gear offers them for 3-spd. (C6) All trucks w/ NP208 or BW1345/1356 transfer case.
Also, this will work for 4X4, if You purchase the proper adapter. US Gear offers them for 3-spd. (C6) All trucks w/ NP208 or BW1345/1356 transfer case.
tractorman86
Registered User
yea im gonna have to call and ask them, i wanna bolt one like this behind a 2wd 6-speed(from their web site looks like it is the same as a 5) then put a divorced MP205 behind that. now i am wondering if there is a way to do that on a single cab longbed without having a 6" driveshaft
f-two-fiddy
Registered User
It's definitely gonna be long.
f-two-fiddy
Registered User
Sold on Ebay for $710
