trythis
Latest activity Postings About
-
-
trythis replied to the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.”.Yes I did get the timing light but I had a problem with the bearing locking up so I never did really get to figuring out that light -
trythis replied to the thread Squawking sound engine lock up?.Well I'm sure you're right about the bearing but as far as the drag queen I have no favorite I have no least favorite. And I believe it...
-
trythis reacted to Austin86250's post in the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.” with
Like.
The way I do it is take an old 5/16” drill and grind the end flat so you can ruin the balanced take vacuum pump out and light drill it... -
trythis replied to the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.”.Another question I have is I never did see we're turning the knob on the back of the timing light I guess that's the advanced knob made...
-
trythis replied to the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.”.The timing project didn't turn out too good, I've worked on this thing for couple days now the timing does not stay in place it varies...
-
trythis reacted to Nero's post in the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.” with Like.
For the timing light? Leave the knob on the back set to zero. With the DTI showing rpm on the left, the timing reading on the right...
-
trythis reacted to MtnHaul's post in the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.” with Like.
Did you abandon the mag probe?
-
trythis replied to the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.”.Yes I did. I think the problem maybe the harmonic balancer it's not real true I don't know what the tolerance can be on this but it's...
-
trythis replied to the thread Squawking sound engine lock up?.I turn the engine over by hand with a ratchet it turned hard all the time whether it's too hard or not I don't know but I could only...
-
trythis replied to the thread Squawking sound engine lock up?.No I have not tried that. But I don't think it would be a rusty cylinder because I did have it running a couple times recently before I...
-
Have you tried rotating the engine with a ratchet to see if there is drag during the rotation. I wonder if one of the cylinders is...
-
Wow I say, what to do? Give you a little history on this truck I've had it since probably 1999. Rebuilt the engine in 2008 may have put...
-
-
trythis reacted to Clb's post in the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.” with Like.
Push and release the offset rocker for 20 degrees of offset... Heres a spring puller tool and the throttle wedge I use. Working on...
-
trythis reacted to ROCK HARVEY's post in the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.” with Like.
The only way I got the probe to work was to jam it all the way in until it touched the balancer. When I let go it sprung back a tiny bit...
-
trythis replied to the thread “Need help using my DTI 3300s timing meter on my 6.9 IDI.”.Well I did get the light to flash not sure that it's in the right time the knob on the back assume would be set to 0 and then I would...
-
-
Loading…
-
Loading…
