M
MJGenay
Latest activity Postings About
-
-
MMJGenay replied to the thread Truck's stumbling on cold start, thinking it might be a fuel pump issue..Alright, so I have a Walbro FRB 13 on order. Planning to plumb that in down by the tanks when it gets here. Can I wire it to get power...
-
MMJGenay replied to the thread Truck's stumbling on cold start, thinking it might be a fuel pump issue..Okay, I put a new mechanical pump on and that seems to have fixed the issue. We'll see if there are any starting issues tomorrow. I...
-
MMJGenay replied to the thread Engine Running Cold.Thanks. 9500'
-
MMJGenay replied to the thread Truck's stumbling on cold start, thinking it might be a fuel pump issue..Shoot. I assumed the 48" referred to vertical lift, not lateral. Walbro's website says the following regarding that pump "Self-Priming...
-
MMJGenay replied to the thread Truck's stumbling on cold start, thinking it might be a fuel pump issue..Thank you. I had to run to NAPA to warranty my brake booster so I picked up a mechanical fuel pump while there. I haven't dug into how...
-
MMJGenay posted the thread Truck's stumbling on cold start, thinking it might be a fuel pump issue. in 6.9L IH & 7.3L IDI Diesels.This issue started about a month ago, where it would catch but take a few seconds of throttle to the floor to get up to normal fast idle...
-
MMJGenay replied to the thread Engine Running Cold.Hmm, fair enough. That's the same link I purchased mine from. Our boiling point is around 195*F here, which is why I gave it a little...
-
MMJGenay replied to the thread Engine Running Cold.Well, here's a little report back and a little PSA. I had some time today to work on that thermostat but I figured I'd boil the new one...
-
MMJGenay replied to the thread Engine Running Cold.Thanks for the information! I'm debating pulling this replacement thermostat and checking it. Probably best to do, however, after...
-
MMJGenay replied to the thread Engine Running Cold.Okay, I picked up the laser temp gauge today and did a little test. After driving around for about 25 minutes I pulled it into the...
-
MMJGenay replied to the thread Engine Running Cold.Apologies, forgot to include the other information on my truck. I do have a pyrometer that came with my turbo kit that is installed...
-
MMJGenay replied to the thread Engine Running Cold.Will order one, nearest harbor freight is like 2 hours away. I have some semi cheap gauges on order for coolant temp and oil pressure, I...
-
MMJGenay replied to the thread Engine Running Cold.thanks for the clarification. Yeah, I'm going to get a coolant temp and oil pressure gauge on it.
-
MMJGenay replied to the thread Engine Running Cold.It was usually fine last summer however I think the thermostat was stuck open for about a month as there was a little while there is was...
-
MMJGenay replied to the thread Engine Running Cold.1.) Yeah, I'm going to test this thermostat when I pull it out. I'll probably wait for the new one to show up so I don't have the truck...
-
-
Loading…
-
Loading…
