dana 50 solid axle with calipers and anti-sway bar $225, $50, $50

[327]

I have dana 50 solid front end with the calipers and anti-sway bar. I want $225 for the bare housing, $50 for the calipers and $50 for the anti-sway bar.

I will trade for some 6.9L IDI engine.

 

[lotzagoodstuff]

I'll be the first to chime in with a comment on pricing. I am not a D50 hater, but the fact is they are very common and not terribly desireable. I won't tell you where to price anything, but in regards to your calipers: you can get reman calipers on RockAuto for $30 each, so I think you might be a little high IMHO.

Take care and good luck

 

[snicklas]

Is this out of a Super Duty? (99+ pickup) Leaf sprung (99 - 04) or Coil Sprung (05+) In the IDI era trucks Ford didn't use a D-50 Solid Axle... they only used the D-44 and D-50 TTB axles.

Just want someone looking at this to know what it is.... if its from a Super Duty, it would bolt right in my truck, but it would take some work to put it under an IDI......

 

[327]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[327]

thanks for the replys. I would trade for a 6.9L IDI core.

 

[lotzagoodstuff]

Is this out of a Super Duty? (99+ pickup) Leaf sprung (99 - 04) or Coil Sprung (05+) In the IDI era trucks Ford didn't use a D-50 Solid Axle... they only used the D-44 and D-50 TTB axles.

Just want someone looking at this to know what it is.... if its from a Super Duty, it would bolt right in my truck, but it would take some work to put it under an IDI......

SD Dana 50 makes a lot more sense, I was thinking it was a TTB D50. That makes the pricing very fair, sorry for the bad assumption on my behalf.

 

[327]

I was hoping to get something out of taking this front end apart. I do want to build a 6.9L

 

[327]

bump. I need a 6.9L IDI engine block

 

[327]

I can't see the last two posts

 

[laserjock]

Working pictures might help your cause. A solid dana 50 axle in the bulk of this community would be pretty weird. Just a thought.

 

[327]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[snicklas]

Pictures not working, here try this:

http://www.oilburners.net/forums/sh...on-how-to-post-pictures-uploaded-to-the-forum

 

[327]

You must be registered for see images attach

You must be registered for see images attach

 

[327]

You must be registered for see images attach

 

[327]

You must be registered for see images attach