03wr250f
Full Access Member
I made this kit to solve the issue of finding a good fan clutch for the idis. I prefer motorcraft parts for most things on my own vehicle. Since they are no longer available for our trucks I developed this kit as a solution for that issue.
This kit comes with everything needed (except time and tools) to install.
I include a controller, adapter bushing, templates, instructions, wiring harness with motorcraft connector, and wiring terminals.
This kit gives the ability to have driver input to engage the electro-viscous fan clutch on(say at the bottom of a hill/grade), or allow the controller to regulate temperature according to coolant temp.
The controller is also user adjustable so you can set it at any desired temperature.
This works with v-belt or serpentine, on the stock fan or for the ultimate setup in cooling, use this fan clutch kit in conjunction with my upgraded 9 blade fan.
Operation:
When it turns on; it starts the fan clutch at 60% duty cycle when the coolant temperature threshold is reached and ramps to 100% duty cycle over 10* of increase in coolant temperature.
For example if you set it to come on at 200* it will turn on at 60% duty cycle and by the time it reaches 210 it will be 100% duty cycle.
With ac it is turned on at 60% to keep you cool in the summer, and 100% on with a user supplied toggle switch for any scenario.
I offer two kits.
One complete kit with all necessary components to swap including a motorcraft fan clutch
$660 shipped to the lower 48
And a builders kit for those of you who want to save a little money and source your own fan clutch. If you go this route, you will need to purchase your own fan clutch from a 2008-2010 f250-f550 6.4 separately.
$350 shipped to the lower 48
Any questions you can message me personally or my Facebook business page Workhorse Customs
This kit comes with everything needed (except time and tools) to install.
I include a controller, adapter bushing, templates, instructions, wiring harness with motorcraft connector, and wiring terminals.
This kit gives the ability to have driver input to engage the electro-viscous fan clutch on(say at the bottom of a hill/grade), or allow the controller to regulate temperature according to coolant temp.
The controller is also user adjustable so you can set it at any desired temperature.
This works with v-belt or serpentine, on the stock fan or for the ultimate setup in cooling, use this fan clutch kit in conjunction with my upgraded 9 blade fan.
Operation:
When it turns on; it starts the fan clutch at 60% duty cycle when the coolant temperature threshold is reached and ramps to 100% duty cycle over 10* of increase in coolant temperature.
For example if you set it to come on at 200* it will turn on at 60% duty cycle and by the time it reaches 210 it will be 100% duty cycle.
With ac it is turned on at 60% to keep you cool in the summer, and 100% on with a user supplied toggle switch for any scenario.
I offer two kits.
One complete kit with all necessary components to swap including a motorcraft fan clutch
$660 shipped to the lower 48
And a builders kit for those of you who want to save a little money and source your own fan clutch. If you go this route, you will need to purchase your own fan clutch from a 2008-2010 f250-f550 6.4 separately.
$350 shipped to the lower 48
Any questions you can message me personally or my Facebook business page Workhorse Customs