WTB asap flexplate for a 94 Turbo IDI

[NJGearhead666]

ok ive searched everywhere for one and can't find it I need the thin flexplate with the welded on gear and 4 bolt holes for the converter. ASAP

 

[metrojd]

is it 2 piece??
kinda like a thin flywheel with a ring gear and then a second thinner plate that the Converter bolts to???
If so i have one off a early IDI

 

[NJGearhead666]

no its the on piece that is stamped with the welded on ring gear that goes on the spacer between the crank and the plate

 

[94turboidi]

I have one, do you still need one? It is a flexplate that was mated to a E40D. I am surprised you wasn't able to find one at Oreilys or something. I got one along time ago for a Aod behind a 302 for like 50.00 I don't want alot for mine just a little for my time and shipping. Thanks

 

[NJGearhead666]

no thanks I already found one. thanks though

 

[icanfixall]

For that flexplate any good trans shop should be able to find it... Maybe even have them in stock... Brian at BTS in Leadhill Arkansas has them... Glad you got one... Now why did you need to replace this??? They don't usually crack...

 

[NJGearhead666]

For that flexplate any good trans shop should be able to find it... Maybe even have them in stock... Brian at BTS in Leadhill Arkansas has them... Glad you got one... Now why did you need to replace this??? They don't usually crack...

yes brian steered me in the right direction the ford and local parts dealer was looking under the wrong part number. the plate that was in my truck cracked completly around the bolts that go into the crank it was just being held together by the crank adapter and the big washer