transfer case ????????

eastsideauto

Full Access Member
Joined
May 10, 2012
Posts
310
Reaction score
0
Location
Denton, NC
Was ther ever a non-slip yoke t-case behind an IDI? Which non-slip t-case can be swapped in?
 

jaluhn83

Full Access Member
Joined
May 19, 2012
Posts
1,597
Reaction score
49
Location
Upper Marlboro, MD
1345 will bolt up, that was stock 80-86. Later 1356 cases are fixed too, but I think they're harder to find.

FYI, the t-cases are the same bolt pattern for all 80-96 trucks, so you can put pretty much anything on there.
 

riotwarrior

Full Access Member
Joined
Sep 19, 2006
Posts
14,782
Reaction score
492
Location
Cawston BC. Canada
Was ther ever a non-slip yoke t-case behind an IDI?
Yes...CC long box and IIRC SC LB as well...the drive shaft is a two piece and uses a fixed tcase yoke

Which non-slip t-case can be swapped in?
Any from the above group or a Bronco one with fixed yoke too. Or a 205 or 203 for that matter if you wanted a 203..LOL

You will need a custom rear shaft for sure if you do not already have a fixed yoke setup....
 

gonecrazyi

Full Access Member
Joined
Aug 27, 2008
Posts
3,276
Reaction score
3
Location
florida
Most of the fixed yoke 1356s I have seen were on broncos and crew cab f250s from 96/97. But there are always oddball combinations that have had them.
 
Top