Track Bar Bushings?-Wobble and Body Roll

jhenegh

Truck Still Earns its Keep
Joined
Jul 7, 2013
Posts
1,072
Reaction score
37
Location
Deerfield, WI
On my 1994 F250 that I put a dana 60 in, it has that infamous death wobble on occasion. I found the wheel bearings needed snugged up and the steering stabilizer was worn out so I fixed those two things today. I haven't driven it since then. The third thing I wanted to address was the track bar bushings. They seem/look loose and when I turn the wheels while not moving, the body rolls before the wheels move. And depending on the road, my steering wheel will be anywhere from 10 to 2 to hold going straight, but there's not much drift or play. On a perfectly flat road it is dead center with little play. Could the track bar influence that too?

Thanks
 

79jasper

Chickenhawk
Joined
Oct 13, 2012
Posts
17,367
Reaction score
1,932
Location
Collinsville, Oklahoma
Yes, it could.
I believe my gearbox is a bit loosely goosey.

Have someone turn the wheel while you look at different components.
 

jhenegh

Truck Still Earns its Keep
Joined
Jul 7, 2013
Posts
1,072
Reaction score
37
Location
Deerfield, WI
Forgot to say, steering gearbox is new Lares reman and axle has only been under the truck for about 500 miles so far
 

jhenegh

Truck Still Earns its Keep
Joined
Jul 7, 2013
Posts
1,072
Reaction score
37
Location
Deerfield, WI
New track bar bushings, tightening up the wheel bearings (they had noticeable play) and a new steering stabilizer tightened it right up. Haven't driven it much since I've done that but it was nice and tight in the 50 mile test drive after.
 

jhenegh

Truck Still Earns its Keep
Joined
Jul 7, 2013
Posts
1,072
Reaction score
37
Location
Deerfield, WI
Hit a spot driving yesterday that had always produced the death wobble before. None this time! I'll think we'll call this case closed. Hopefully it helps someone else's search!
 

Forum statistics

Threads
93,197
Posts
1,158,283
Members
26,623
Latest member
bneumann22

Members online

Top