Torque specs

[Archieb89]

Anyone have the torque specs for both axle pivot bolts to frame and both radius arms to frame/bracket. I've got a 2wd 91 f350 drw

 

[Nero]

Here ya go

You must be registered for see images attach

 

[FrozenMerc]

300 ft-lbs would be nominal. Time to get the big torque wrench out....

 

[rreegg]

300 ft-lbs would be nominal. Time to get the big torque wrench out....

Dang even the basic 3/4” torque wrench click type from harbor freight is $400. The 1/2” maxs out at 150 ft-lbs

 

[Nero]

To be clear you need the 120-150ftlbs spec... Lol

 

[FrozenMerc]

There are 1/2" drive Torque Wrenches on the market that go to 300 ft-lbs, I think Snap-On sells one. I have bought a few of them over the years, but it has been a while. However, they won't be any cheaper than the 3/4" from Harbor Fright, and you better have good sockets and adaptors. 300 ft-lbs is about the point that a 1/2" drive starts to twist off.