Started Intercooler install lots of pics

[alienturtle]

Finally started my intercooler install today and got fairly far on it. Iv had this intercooler sitting in my room for a while just haven't had the time to get it installed. Here are a bunch of pics of the install. I should be finishing it up tomorrow and get more pics uploaded. I have the cooler mounted and all the tubing laid out in my head where i want to go with it. But because my tubing is 3" aluminum tubing i have to use a cut off disk that hasnt been used on steel yet due to welding purposes. Of course the moment i realize this all my local stores where closed . Enjoy ;p take a look.

Top mounting brackets.

You must be registered for see images attach

You must be registered for see images attach

Bottom mounting brackets.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[The Warden]

What intercooler is that? What are you planning to do for grille fitment afterwards, or does the stock grille fit in over the IC?

Looks good!!

 

[typ4]

looks to me like the wrx IC off ebay, I have almost the exact one on my sandrail, the grill will need to be sliced off the back. to fit

 

[alienturtle]

I currently have the billet grill so the intercooler clears no problem.

Yes this is a cooler from ebay

Bar & Plate Intercooler
Core Size: 24x12x3 inch
Overall Size: 31x12x3 inch
Inlet and outlet sizes: 3 inch

more pics to come this afternoon!!

 

[88beast]

damn he put that cummins in now hes got that dodge hitch cover too soon hell have dodge rims and dodge axles and other crap
but looks good man

 

[alienturtle]

lol...dodge towing mirrors are next....

 

[88beast]

really please dont do them like oreo on fte do them right and move them foward to the door edge

 

[alienturtle]

really please dont do them like oreo on fte do them right and move them foward to the door edge

o dont you worry... Its factory or better with me

 

[alienturtle]

More pics.. still not done with it because i had to order a speciel 90 with 2" on one side and 3" on the other. but all the pipes got tig welded together yesterday. So as soon as i get that elbow in its a matter of putting it back together. My on board air pump made the cold side very fun.

You must be registered for see images attach

Got the support cut out to accept the pipe

You must be registered for see images attach

Cold side. Actually has plenty of room for engine shake.

You must be registered for see images attach

You must be registered for see images attach

Tig welder at work

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Agnem]

Looks identical to the intercooler I used in the Moose Truck, which if I recal was from CRX Racing, and was designated as an intercooler for a 5.0 Mustang.

You must be registered for see images

Very soon, I will be doing an install of a Hypermax intercooler kit, and documenting it with a tech article. The goodies just arrived.

You must be registered for see images

You must be registered for see images

 

[alienturtle]

Looks identical to the intercooler I used in the Moose Truck, which if I recal was from CRX Racing, and was designated as an intercooler for a 5.0 Mustang.

that is exactly correct how did you like it?

 

[hesutton]

Looking good AT. Hope to see it finished soon. Did you ever get your wiring sorted out? I'm still grinding away at it when I get time off from work (rare these days).

Heath

 

[alienturtle]

Looking good AT. Hope to see it finished soon. Did you ever get your wiring sorted out? I'm still grinding away at it when I get time off from work (rare these days).

Heath

i got the box mounted but nothing hooked up yet. iv been working on the intercooler the last couple days. I did finally get my turn signal, 4x4, low range, rear anto lock lights wired in finally for the dash.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

what a fun mess..cant wait to get the dash pulled out and all this junk wrapped up in a harness.

You must be registered for see images attach

 

[bike-maker]

Where did you get the holders for the dash indicator bulbs? I'm looking for some like yours that don't use the stock circuit paper.

 

[Dieselcrawler]

Very soon, I will be doing an install of a Hypermax intercooler kit, and documenting it with a tech article. The goodies just arrived.

You must be registered for see images

i love getting a box of parts. lol