Shackle Reversal Kit on 1988 F350

[Diesel_brad]

Yea. shackle reversal is done shocks are in. I need to make a new tie rod and build a new panhard bar. The sky mfg drop bracket for the panhard did not work with the added 4" lift springs.

Sky has an adjustable track(panhard) bar.

 

[88IDITurbo]

Yea I looked at the sky mfg. tracbar bar but wasn't sure if it would work with my application so I am going with my own. Going to tie the upper mount into the drivers side frame rail and the lower mount will be upward and offset from the axle to line with the pivot axis of my tie rod/ histeer arms. Both joints will be superpivot joints with 3/4" studs for adjustment.