Intake hats

[typ4]

Any one want to be serious on any intake hats I have to order parts and need to know how many to get, Punkmechanic was getting me a great deal on the elbow but he is no longer at ford so they will be .

112.00 shipped with the gasket between the elbow and lower and mounting hardware.

 

[Dieselcrawler]

thats a 6.0 elbow correct? got any pics of it off the motor?

 

[typ4]

not handy

 

[Diesile]

Yep I'm in Russ. Meant to do it before and forgot so best I jump right in.

I assume you are ready to go pending funds.

 

[ocnorb]

thats a 6.0 elbow correct? got any pics of it off the motor?

Best I have:

You must be registered for see images attach

 

[itsacrazyasian]

theres demand for the 6.0 intake elbow? let me rephrase. Theres a use for them other than on a 6.0?

 

[lotzagoodstuff]

Russ, I've got a friend with a pretty big bender that I'd like to show this part to. He usually does heavy walled hydraulic tubing, and I for one think a smooth bent tube would be pretty cool (stainless steel maybe?).

Can you tell me what the rough diameter is, id or od is fine, I want to get a quote from him on what he'd want for the tubing. I have another buddy with a lathe.......and a welder.......

 

[ocnorb]

theres demand for the 6.0 intake elbow? let me rephrase. Theres a use for them other than on a 6.0?

Best way I've found to hook up an IC.

You must be registered for see images attach

 

[gonecrazyi]

I've got one of those as well. Hope to use it one of these days.

 

[Dieselcrawler]

*** is the bellow lookin thing under it? and what holds it down?

 

[subway]

there is a boss coming out the top that Russ welds on for the bolt to pass through.

 

[pennsylvaniabo]

Russ, I've got a friend with a pretty big bender that I'd like to show this part to. He usually does heavy walled hydraulic tubing, and I for one think a smooth bent tube would be pretty cool (stainless steel maybe?).

Can you tell me what the rough diameter is, id or od is fine, I want to get a quote from him on what he'd want for the tubing. I have another buddy with a lathe.......and a welder.......

ID for the motor side is 5.125", the ID for the tube above i would say would
3" or 3" od 2.5"ID depending on what wall you are using.

 

[typ4]

Probably cant bend one that short, and I cant weld stainless yet.

 

[typ4]

Yep I'm in Russ. Meant to do it before and forgot so best I jump right in.

I assume you are ready to go pending funds.

Correct.

 

[typ4]

Best way I've found to hook up an IC.

You must be registered for see images attach

Pretty nice, I REALLY like that downpipe clamp, no seriously its a great fix.

Mans gotta do what a Mans gotta do.