Just wondering if anyone knows a shop in the Denver area that knows IDIs, Mines eating alot of oil. 4quarts every 100 miles or so. And its got a knock, but I think its injector, one of the the back two on the passenger side. Just don't have the time to mess with it anymore. Hopefully its all minor fixes. Might have to "punt" it.
idi Mechanics in Denver area?
- Thread starter 69scout
- Start date
C_Luft
Full Access Member
DANG!!! a gallon in a hundred miles, are there any external leaks, please put your truck and details into your signature.
You must have a blue cloud chasing you everywhere you go.
A Cdr is most likely the culprit. Changing a cdr and a set of injectors is not really that hard. You just need a good couple hours and six pack.
You must have a blue cloud chasing you everywhere you go.
A Cdr is most likely the culprit. Changing a cdr and a set of injectors is not really that hard. You just need a good couple hours and six pack.
Sorry I left out the details. Mileage is unknown, 90 F-250 5speed, I've done a ton of reading in the FAQs, replaced the cdr, gromet and tube. still going threw the oil, I'm down to oil seal at turbo, bad rings, or o-rings in the heads. I've found a shop in Westminster that might look at it also Douglas County Diesels says they aren't scared to look at it. Just wondering if any one had any other suggestions
C_Luft
Full Access Member
I would check the play in the turbo (in/out and side to side).
Similar threads
Latest posts
-
-
How to measure valve stem to rocker arm pad clearance?
- Latest: 8769bigred
-
-
