ksingltn
Full Access Member
Had this presold before I bought the 88 F-Superduty I am parting out, but that deal fell through. This is everything you need to convert to hydroboost with no parts chasing and fix your firewall at the same time.
Setup includes:
Power steering pump with hydroboost reservoir. Looks to be a fairly new reman. Has V-belt pulley and mounting bracket
Both pressure hoses, pump to hydro and hydro to gear, as well as the hydro to pump return line. Hoses look to be in good shape, with no obvious cracks or abrasions. Return line may be worth replacing, but its just a common hose, no special fittings and it does not leak that I can tell.
Hydrobooster with F-superduty master cyl.
'88 pedal set for a manual trans truck. Custom clutch pedal cover for no extra charge
Firewall repair plate with mounting hardware. This is the one you have to remove the cowl panel to install. One of the holes for the clutch MC is chewed up because the PO did not use a washer under the nut, and the nut pulled into the slot. Should work fine with a washer.
All of the parts work well, I drove the truck about 20 miles home and there was no noise from the pump or any other noticeable problems.
Asking $350 shipped to the CONUS. Would prefer not to separate, and sell all as a set.
Setup includes:
Power steering pump with hydroboost reservoir. Looks to be a fairly new reman. Has V-belt pulley and mounting bracket
Both pressure hoses, pump to hydro and hydro to gear, as well as the hydro to pump return line. Hoses look to be in good shape, with no obvious cracks or abrasions. Return line may be worth replacing, but its just a common hose, no special fittings and it does not leak that I can tell.
Hydrobooster with F-superduty master cyl.
'88 pedal set for a manual trans truck. Custom clutch pedal cover for no extra charge
Firewall repair plate with mounting hardware. This is the one you have to remove the cowl panel to install. One of the holes for the clutch MC is chewed up because the PO did not use a washer under the nut, and the nut pulled into the slot. Should work fine with a washer.
All of the parts work well, I drove the truck about 20 miles home and there was no noise from the pump or any other noticeable problems.
Asking $350 shipped to the CONUS. Would prefer not to separate, and sell all as a set.
You must be registered for see images attach
I really like how people can think up a repair that works. I'm impressed. Thats a steal of a del. Is that firewall reinforcement plate the one Jason makes. Sure looks like it.
