Direct fit fuel pump block off plate.

[IDIoit]

No modifications at all.
Direct fit
And looks decent!!
I don't know why I'm so excited about this. But I thought I would share.

You must be registered for see images attach

You must be registered for see images attach

 

[Waystro]

I need one of those Po left the pump attached.

 

[icanfixall]

Thanks for the great pic showing lots of "things". First you have shown all of those that this needs to be carefully installed so the plate does not hang up on the non machined lips. Secondly you have shown the magnetic probe location at the damper tab. Its the tall skinny tube. Not the short fat tube where we have the zero mark for top dead center. And lastly you have shown the front oil dip stick tube location that has a plug in it. Thats where any idi installed in a big truck like an international S1600 has the dip stick. They also have the oil pan turned around backwards and the oil pickup to the pump set up much differently than in a van or pickup truck.

 

[riotwarrior]

No modifications at all.
Direct fit
And looks decent!!
I don't know why I'm so excited about this. But I thought I would share.

You must be registered for see images attach

You must be registered for see images attach

Oh look fancy finned chromey blingy pos


Real man would make a plate with a port for return line err sumthin like that...chrome dont getchahomeboy

I see...yer one of those.....barnyboltonboyz....betcha pants hang down and ya show yer shorts too

 

[IDIoit]

Oh look fancy finned chromey blingy pos


Real man would make a plate with a port for return line err sumthin like that...chrome dont getchahomeboy

I see...yer one of those.....barnyboltonboyz....betcha pants hang down and ya show yer shorts too

BOLT ON RANGER!!!!
yup thats me!!!

dont be hatin on my fins! they are designed to dissipate heat and haters!!!
this is where the hotrod side of me takes over.
ive done enough bracket making and metal sculpting in my day i know when to say...
that things 5.99? ill take it!
ill spend my time making custom intakes and exhaust

and no my pants fit my waist.

 

[typ4]

Pants? We dont need no stinkin pants.

 

[icanfixall]

Pants? We dont need no stinkin pants.

Well I know I sure don't need em... Most of the time round these parts.

 

[IDIoit]

ok people, keep your damn pants on.
it wasnt an invitation to take em off...

... well atleast on my end..
cant speak for Russ

anyways... heres the e-bay link.
cost a dollar more than i spent, but the same price as the chrome GM block off plate that you gotta grind.
http://www.ebay.com/itm/331205551608?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

[gandalf]

Pants? We dont need no stinkin pants.

Well I know I sure don't need em... Most of the time round these parts.

...
Every post is a new record for this forum. Glad to help out too. It keeps my hands busy....

You must be registered for see images attach

I'm beginning to get worried, Gary.

 

[whiteboyslo]

Spectre 42473 is also a bolt-on plate that won't interfere. For an extra bonus, it comes with bolts and gaskets.

Mike

 

[TahoeTom]

OK, Your engine block sure looks clean. Is that just the result of power washing? It looks like it has been media blasted. Usually there is rust and old oem paint.

 

[IDIoit]

OK, Your engine block sure looks clean. Is that just the result of power washing? It looks like it has been media blasted. Usually there is rust and old oem paint.

One of the blocks I pulled apart looking for a good short block for my 87.
Was less than perfect, so I freshened it up
Steam cleaned it and hit it with some rattle can.
I expect to put this in my hotrod build

You must be registered for see images attach

 

[icanfixall]

Nice looking engine Brian. Look at both sides of the front and back of the heads. See those allen bolt head screws?? Well those are oil return ports so oil can be routed to them and drain back into the lower edge of the heads where the oil drain back channel is. Because your valve covers are off you may be able to see the inside holes in the heads.

 

[FORDF250HDXLT]

No modifications at all.
Direct fit

same with the 429/460 bb ford Mr. Gasket 5422 as well.

 

[sjwelds]

^^^and the Spectre brand plate as well. Don't ask me how I know.