Brake system- modified 4 wheel disc, Q's and C's

[jhenegh]

Cruise control cutout switch. I just went through this. You can buy F-super master cylinders for non-cruise trucks that have only the two outlets for the front and rear lines (I own a used one of those that came with my hydroboost box of goods). OR, you can buy a F-super master for a 92-97 that had cruise control (what you've got in your picture) and get that 3rd port for the cutout switch (like what I used on my 94 F-250 with electronic cruise).

If I recall correctly you stole all the electronic cruise gagetry from that beautiful teal OBS 460 truck and put it in that beautiful green bricknose 6 door truck??

 

[79jasper]

Correct. Just lights up the brake light for low fluid levels.

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[IDIoit]

Cruise control cutout switch. I just went through this. You can buy F-super master cylinders for non-cruise trucks that have only the two outlets for the front and rear lines (I own a used one of those that came with my hydroboost box of goods). OR, you can buy a F-super master for a 92-97 that had cruise control (what you've got in your picture) and get that 3rd port for the cutout switch (like what I used on my 94 F-250 with electronic cruise).

If I recall correctly you stole all the electronic cruise gagetry from that beautiful teal OBS 460 truck and put it in that beautiful green bricknose 6 door truck??

yes i did, i may use it, i may not.... dont know yet.
btw, im using about every square inch of that truck.
gonna use the cab to re-make the bronco.
sold enough parts to double my money back, and use alot of the goods on the 6 door.

 

[jhenegh]

I'm glad someone like you who literally makes custom trucks with the pieces is the one cutting that thing up and not just some Craigslist part out disgrace

 

[laserjock]

I must have the non-cruise one because mine does not have that port.

 

[IDIoit]

You must be registered for see images attach

can anyone confirm if the rear port fitting in the MC is a flow reducer?
brakes are almost ready to be addressed.
wondering if i should even mess with the proportioning valve i bought...