Banks turbo downpipe

[vanillavanwinkle]

Hey there, sorry if this has already been posted, tried searching and couldn't find anything on it. I just picked up a new engine, 1994 7.3idi, It has a banks sidewinder turbo on it, but it's missing the downpipe. I know nothing about these turbos, so I'm not sure how identify exactly which one it is, but would anyone know where abouts to pick up a new downpipe for it?

 

[IDIBOBS]

A good muffler shop should be able to make one for you. Or call banks and see if they will sell you a down pipe. They still make the later kits. Or find one used around here

 

[vanillavanwinkle]

A good muffler shop should be able to make one for you. Or call banks and see if they will sell you a down pipe. They still make the later kits. Or find one used around here

Oh didn't know banks still made them, I'll give them a shout, thank you

 

[u2slow]

What kind of flange?

Wouldnt be the first time I cut the flange of something else and fabbed exhaust pipe sections as needed.

 

[vanillavanwinkle]

What kind of flange?

Wouldnt be the first time I cut the flange of something else and fabbed exhaust pipe sections

It's the late model I believe so just the v-band flange, no bolts on it. Can't seem to find much on it though, everything comes up with powerstroke

 

[u2slow]

3" formed flange for a V-band can be cut off a 1stgen Cummins downpipe... If you can't find a pre-made piece.

 

[vanillavanwinkle]

3" formed flange for a V-band can be cut off a 1stgen Cummins downpipe... If you can't find a pre-made piece.

Well that makes it a lot easier, thank you. The wrecker I got it off said they should have the downpipe but they gotta hunt for it, so if they can't find it I'll probably just get one made

 

[u2slow]

Here the downpipe for the cummins dodge. Tape measure says it's same size as my 94 TiDi.

You must be registered for see images attach

 

[DirtyWood]

There's also this, https://classicdieseldesigns.com/co...products/banks-sidewinder-wastegated-downpipe