97 f350 CLUTCH PROBLEM

[great white]

I HAVE A 97 F350 7.3 4X4 5SPEED, AND MY QUESTION TO YOU GUYS OR GALS IS IF ANYONE HAS EVER HAD THE PROBLEM WITH THE CLUTCH PEDAL ASSEMBLY OR MAYBE THE CLUTCH SLAVE? I HAVE REPLACED BUSHINGS, AND THE THROWOUT BEARING. IT SHATTERED ON ME AND I THINK IT WAS BECAUSE OF NOT ALWAYS ENGAGING. I JUST FEEL LIKE I AM NOT GETTING 100% OUT OF MY CLUTCH. I HAVE A GOOD AMOUNT OF PLAY IN THE PEDAL WHEN DISENGAGED. THE CLUTCH IS GOOD, BUT JUST DIFFICULT TO GET INTO GEAR.
THANKS

 

[great white]

THANKS FOR THE INFO

 

[howards@howard]

bad clutch

I had the same problem, stiff pedal , can never seem to get it fully disengaged
hard time with 1st and rev

New SB clutch kit all set no more problem. Can push it in with bear feet.

I suspect the pressure plate was bad.

 

[Tim the 2lman]

When you talk about bushing relpacement, are you referring to the one inside the cab that connects the pedal assembly to the master cylinder push rod?