I recently purchased a driving 1985 E-350 w/ 6.9 IDI. It had a fuel leak and after replacing the return line fittings I discovered the problem was the cyl#8 steel injector line. It doesn't line up well and the ferrule is cracked. I bent it to get it to line up straight but it still leaks a steady stream. I'm looking for a cyl#8 injector line in the Salt lake area or further south. I'm willing to drive the van to get a part but I would like the leak fixed tomorrow so I can return home to southern Utah and continue using the vehicle. I would also buy a full set of injector lines for more $$.