Search results

  1. 1Turbo10

    Zf5

    Duralast/Clutch Set Part Number: NU31411LFW Total cost 269+ tax...U can not beat it! Turned out to be a 12.25 clutch disc with 10 springs!! Should take care of the rool over problem! disc and presure plate are stamped FW,I'll bet forth worth clutch is the vender?? Flywheel is stamped...
  2. 1Turbo10

    Autozone Clutch system update...WOW!!

    Thanks lotsagoodstuff, I was building a S-47 2 wheel drive trans for my cc dually, when I stumbled on a great deal on a S-42 from a 460 7.5. It's a 4x4 with transfer case so I will now have super low 1st + transfer case Low in my 2 wheel drive truck! I went to 3.55s in the rear so this combo...
  3. 1Turbo10

    Autozone Clutch system update...WOW!!

    Well,I just got a chance to go through and take a good close look and let you all know what I found. To say I am ecstatic would be an understatement!! The Disc is a Duel 10 Spring and measures 12.25! Yes! The pressure plate and disc are both stampeded FW...Could that stand for Fort Worth...
  4. 1Turbo10

    1989 Ford F-250 XLT Lariat fuel tank sending unit

    Best deal I found is Rock auto,you can use with minor mod the 7.5 460 to work just fine.
  5. 1Turbo10

    Outstanding Clutch Flywheel Deal Auto Zone

    Oh yes,the vanishing receipt! Not to long ago I pulled some out and they were all blank,parts store had them on file but I like having my own. I suggest you make a copy of them and save those. As far as the liberal replacement policy it is smart marketing,think how much advertising cost them...
  6. 1Turbo10

    Outstanding Clutch Flywheel Deal Auto Zone

    If you ever use their brake pads,all the replacement ones are free!! I am on my 4th set...Free! Az is great that way give it a try.
  7. 1Turbo10

    Outstanding Clutch Flywheel Deal Auto Zone

    I just had to pass this one along. I just received mine and it all looks great. Auto Zone online only,has a deal for Clutch,Presure plate,TOB and Flywheel Free shipped with a 50.00 discount using their code for a total to your door of 269.00+ Tax!! Has a Lifetime on it also!
  8. 1Turbo10

    Installing a ZF S-47 Any Ideas for the Speedometer??

    Yes,main shaft and case will not allow a speedo Gear. I will check out the Ispro set up,Thanks.
  9. 1Turbo10

    Installing a ZF S-47 Any Ideas for the Speedometer??

    Gps speedo is a thought,anyone make an Electronic one that would use magnets ane read driveshaft rotation??
  10. 1Turbo10

    Installing a ZF S-47 Any Ideas for the Speedometer??

    I am replacing the old T-19 with a S-47 I am rebuilding. Problem is the ZF has no place for a Speedometer input. I have an 87 2 wd CC Dually and I do not want to loose the speedo!! Any Ideas would be welcome.
  11. 1Turbo10

    Ebay find

    Nice Truck! They are 3 miles down the road from me!
  12. 1Turbo10

    Ebay $60 AC condenser?

    Put one from e bay on last year,condenser was good quality and cooled better than the factory unit. Napa sells whats called Freeze 12 works just like 12a. except it's cheep. I am in Georgia and it's all working great for over a year now.
  13. 1Turbo10

    Chicken lights

    Ryder Truck parts has the best deal on Cab Lights. I purchased a new complete set for 31.69 inc shipping. Cab Marker Light Yellow, 25760Y, Truck-Lite. Hope this helps.
  14. 1Turbo10

    E fan mod test for Rodney Red Rad update

    A couple of thoughts,you can gut the thermostat and that will answer that question. Also is it possible that your cooling system is getting air bound somehow at the higher road speeds,that would keep the water Pump from circulating the Coolant.
  15. 1Turbo10

    Dash paint

    Follow above statements, just did that last weekend and totaly impressed!! Great quality.
  16. 1Turbo10

    well this will divide the men from the boys

    Snail Mail!! Big Mistake,they can't keep track of anything,even if they tried!
  17. 1Turbo10

    New rear tires chopping up?

    I would get them balanced again.
  18. 1Turbo10

    Viton orings

    Mine came today also...Thanks
  19. 1Turbo10

    Viton orings

    I am in also for 100. Please let me know the next step,paypal would be great.
  20. 1Turbo10

    4.10 to 3.55 swap?

    I have a cc Dually with a N/A 6.9 with a T-19. The 4.10 pinion gear decided to let loose (common with short Pinion) So I installed a new set of 3.55's, all I can say is,it was the best thing I could have done. The Truck drives so much nicer now! I have an S-47 with the 5.08 1st gear I plan in...
  21. 1Turbo10

    ZF-S5-47 rebuild kit in a S5-42?

    Yes,They do require a differant overhaul kit.
  22. 1Turbo10

    An offer to members

    Thanks in advance 2ftjw3512hca88639 [email protected]
  23. 1Turbo10

    bearing numbers please for 10.25 Sterling center housing

    Just did mind (gear change) last week, re used the carrior though bearings were fine. Timkens are very common you should have no problem finding them.
  24. 1Turbo10

    Side mounted turbo?

    We did just that on an old Dodge Dakota one of my employees had. We put a grand national turbo on it. I was shocked how well it worked. truck ran awesome. Just cut a hole in the cast iron manifold and Welded a pipe off of it. Worked is all I can say!!:dunno
  25. 1Turbo10

    Tinted headlights

    When night shades first came out I used to sell a crap load of it. The stuff works great but the trick is that you are supposed to spray it on the back side of the lens,not the outside. Take everything apart,clean well and only spray a very light cote,when you do it that way it causes a shadow...

Latest posts

Forum statistics

Threads
91,279
Posts
1,129,717
Members
24,098
Latest member
William88

Members online

Total: 548 (members: 6, guests: 542)

Share this page

Top