Mine just turned over 251000 this week. I thought I'd treat it right so I put a 215 pump in it a couple of weeks ago and set the timing at 19.5. Talk about sticking a hot wire up a dogs ass, it really woke it up. Now to control the almost 50 lb. of boost the 35-40 is making!I'm putting studs in...
Just pulled my 96 auto this weekend. It worked real good in drive, would hold about 2700 rpm's. I thought maybe it was lugging to much so I shifted to 2nd and the rpm's went to about 3500 and it slowed down. Went back to 3rd and went 294 before it spun out. First time pulling in 20 years so it...
The other guy called superchip hotline and they told him to set the pin setting on lower settings. Don't know why but it seems to work for now. I'm going to put my tst box on tomorrow and see if it will work. It sure doesn't seem like a reasonable fix to me but I would try almost anything right now.
Talked to him last night, it must be the boxes we have. With new pump his won't do it without the box but will with the box. We both have superchip boxes which as I understand are just rebadge ez boxes. He has my old dd2's said when he took box off it sure didn't run as good. Has anyone had this...
I've posted this before but I'll ask again. Two of us have 2001.5 ho trucks with the same problem. Mine has about 97000 miles and other truck has about 54000 miles on them. Both have a random stumble. Other truck was taken to the dealer and new vp, lift pump, and not sure what else. Didn't help...
Pretty well maintains legal speed down the road. At 24000 gross on I-70 I can usually maintain 75 to 85 at all times. This poor old dodge does a GOOD job pulling a trailer. Had a 88 ford 7.3 with ats turbo on it before, it wouldn't get out of it's own way and about 50,000 miles was all I could...
If you stop on a big hill it's a bitch! I use low lock anywhere off road or trying to back it in anywhere. It really does pull it good down the road. I usually pull in 5th gear on the road, fairly flat rolling country around here unless you get around the mississippi or missouri rivers. Haven't...
I pull a 436b fwd, extendahoe behind my 2500. Axles are homemade out of one ton chevy corporate rearends with sch. 80 pipe the right size to press on the tubes. Pushed it all the way to the backing pads with a 30 ton press welded on ends and put a few plug welds along tubes. Use electric over...
I'm running rp in my six sp., it really made it shift smooth. Couple of guys with 5 sp. running red line and it made theirs shift alot better too. Me thinks about all the name brand syn. are of good quality and will work good in the manual trans. I wouldn't go back to the stock stuff at all.
Is this TAG thing the piece that goes in the inlet of the turbo and straightin's the air out? What benefits have ya noticed with it and who sells it. Wonder if it will work with the twin's I'm fixin to put on this spring?
Let's here on the different kinds of gooseneck balls you all have and how you like them. I've got a hide-a-ball, not sure of the brand. Ball is mounted on a crosspin and rolls over into the bed flat when not in use. I pull a trailer alot and pretty good loads too, the pin is starting to get a...
Does replacing stock bushings with poly bushings help with handling of the fwd trucks and has anyone replaced stock arms with aftermarket arms and what do they think of them?
If DODGE had only put the little 3.9 diesel in our trucks we might have all been on the same level!Naw, I like it the way it is.: -Flame Thr -Flame Thr :D :D :D :D
Saw on another site where a guy changed his APPS. and it stopped his random missing. Could someone enlighten me as to what this is and where it is located? MAYBE this would keep me from having to buy a pump but I dout it.
His is the first auto I have rode in. When you mash it seems like the torque converter just sucks up all the power as it is excellerating. Tranny does shift real firm so it could have been worked on before he got it. I know he doesn't need all the extra hp. but it's so easy to get and is nice...
My brother bought a 94 auto unmolested truck. It runs good but after he rode in my truck he would like a little more power. What needs to be done to the auto to stand up to somewhere between 250 to maybe 300 horse. He pulls light loads but mostly just for transportation. Thanks
About early 80's had a two wheel drive chevy luv with a pretty good running small block chevy in it. Went out to a small pond with a bunch of four wheel drive trucks to watch them play in it. Seemed to be some beer drinkin going on and I did my share of it. Decided I could make it across the...
Hey, thanks alot for info. Sounds like save some money on injectors and put some where else on truck.He's just looking for a decent running truck so I think what you said backs up what we are going to do.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.