Search results

  1. 7.3IH_Eggrole

    Glow Plug or Controller or Something issue

    Alright, I'll try anything once.
  2. 7.3IH_Eggrole

    Dana 50 TTB Hub

    I can't get conformation from them that either of the two they sell are for D50 (I know they take returns, I just don't like wasting time). I will check later and see if they sell a one for a 92 F350. By the way I called my local Ford dealership and for future reference Ford no longer can...
  3. 7.3IH_Eggrole

    Dana 50 TTB Hub

    Thanks icanfixall, I will keep this in mind if it comes down to it.
  4. 7.3IH_Eggrole

    Glow Plug or Controller or Something issue

    So I think I'm going to put a new glow plug controller on this truck for him to see if that cures this problem. I've got some hub issues on my truck (some of you might have seen my other thread going right now) and I might drive his in the mean time. What is the best controller for this...
  5. 7.3IH_Eggrole

    Dana 50 TTB Hub

    So its been a week and a half and I still haven't got this thing back together (other more pertinent issues are dominating my time it seems) and I thought I might try a new approach. I know that a Dana 60 hub will go on a Dana 50 spindle, at places like AutoZone you can get a reman Hub and...
  6. 7.3IH_Eggrole

    Dana 50 TTB Hub

    The new ones were Timken, when I redid the other side (in July of this year) I used Timken parts and have had some success. Is there a better brand?
  7. 7.3IH_Eggrole

    Dana 50 TTB Hub

    Thanks franklin2, I'll keep those places in mind.
  8. 7.3IH_Eggrole

    Dana 50 TTB Hub

    My left front hub was in need of new bearings, so I replaced them and the new race is spinning hub. This is in a 1992 F250 4x4 Dana 50 TTB. Where can I get a new hub? Does Ford or Dana even support the hub anymore? Thanks
  9. 7.3IH_Eggrole

    Glow Plug or Controller or Something issue

    Currently my Dads (1992 F350 IDI) truck is having some WTS light irregularities lately. A couple weeks ago the WTS light was going off within 2 seconds of turning the ignition switch on. For his truck that is normally as sign that the No.7 glow plug is bad. We checked it and the rest with a...
  10. 7.3IH_Eggrole

    Brake Pedal Flies to the Floor

    Replaced the master cylinder and everything seems to be good. As a matter of fact the brakes are better than I can ever remember them being. Bench bled them then bled everything starting from closest and worked my way further from the MC. I did end up putting a new NAPA 1.25" MC that was...
  11. 7.3IH_Eggrole

    Brake Pedal Flies to the Floor

    Thank, I'll keep yall posted. I might try the plug idea after I get home
  12. 7.3IH_Eggrole

    96 F350 wont shift into or out of overdrive

    So my Dad's 1996 F350 PSD 4x4 has been having some shifting issues lately. It is an automatic and a month ago he had the transmission rebuilt. Now most of the time it will not go into overdrive, it doesn't matter if its first thing in the morning or after its been run all day. This has been...
  13. 7.3IH_Eggrole

    Brake Pedal Flies to the Floor

    Thanks fellas, no more than the parts are I'll tear into the MC. Any words of caution/wisdom for doing that?
  14. 7.3IH_Eggrole

    Brake Pedal Flies to the Floor

    Alright, so since what I'm about to described happened today I have been reading older posts about "sinking" and "spongy" pedals. My problem is this with my 92 IDI: I step on the pedal and it flies to the floor like I missed the pedal all together. New calipers and pads a month ago...
  15. 7.3IH_Eggrole

    Moose Pump Core

    Moose Pump money... I like that, we'll see.
  16. 7.3IH_Eggrole

    Moose Pump Core

    Sorry that was a crappy leave there. I'm in a daze. Yeah I'm fine, my feelings are a little bruised, but it can be fixed. The young lady is fine as well, the air bags did there job for her. Her face was a little red and from what I understand that was her only complaint. Turns out she was...
  17. 7.3IH_Eggrole

    Moose Pump Core

    Thanks fellas but I had a nice lady decide to run over me at a stop light on Sunday, so my priorities have changed. Thanks again. -Eddie
  18. 7.3IH_Eggrole

    Moose Pump Core

    Everyone, I am in need of a decent 7.3 injection pump to use as a core to have it Baby Mooseified. If anyone is looking to do business please PM or let me know some how else. -Eddie
  19. 7.3IH_Eggrole

    Vaccum Mystery

    Fellas, Put a new pump on and new lines, problem fixed. Got a vacuum gage too. I know Mel will like that. Ed
  20. 7.3IH_Eggrole

    Vaccum Mystery

    Maybe so, I'll just buy a new pump, I just hate to waste the ~$250 if its a line, but I'm not losing anything when the system goes static. But I'll have a gauge this time.
  21. 7.3IH_Eggrole

    Vaccum Mystery

    So right off the pump and the pump alone I am getting a little better than 19" and it is pretty instant. Also I left it connected and after an hour I lost no vacuum on the pump. Also put it back together and brought the system up (again with a stop watch I see 19" in about 8 or 9 seconds) and...
  22. 7.3IH_Eggrole

    Vaccum Mystery

    Yes Mel I know you've said that before. And I feel that you are right, but my question here is why am I only haveing trouble in cooler temperatures. I have no problems from the months of March to September with the same system. It starts getting cold and for two years in a row now my brakes go...
  23. 7.3IH_Eggrole

    Vaccum Mystery

    OK since it was asked I went and checked. I got 19" in about 8 seconds.
  24. 7.3IH_Eggrole

    Vaccum Mystery

    I haven't payed any attention to recovery time, but it pulls a little better than 18
  25. 7.3IH_Eggrole

    Vaccum Mystery

    So fellas lets see if yall can solve this riddle I've been having. Last year about this time (the time of the year when it starts getting a little cooler here in North Carolina) I began having problems with the brakes on my 1992. I drove it like that until about Feburary. I would push the pedal...

Latest posts

Forum statistics

Threads
91,261
Posts
1,129,463
Members
24,090
Latest member
Larrymac

Members online

Total: 479 (members: 4, guests: 475)

Share this page

Top