Search results

  1. A

    Axle not centered

    I have an early 2004 f250 4x4 I put a 3in leveling kit on and put an adjustable track bar in but the axle is off center and pushed to the passenger side causing the driver side of the leaf spring to hit on the sway back end link. I can’t get the track bar to adjust anymore. Anyone ran into this...
  2. A

    Kinda weird issue

    2004 f250 6.0 it’s having an issue with heat it’s got heat until you let off the throttle. But even at 190 or 200 degrees it’s not the warmest heat I’ve checked the heater core it gets hot the blend door works and the heater valve on the hose works. It’s got a new thermostat as well. I was...
  3. A

    Weird heat issue

    Hey guys my 2004 the heat worked great when I got it the I did the oil cooler and deleted the egr cooler. But now has no heat at all the valve works I can get some heat when driver but not enough to really even notice. I was thinking maybe the heater core got plugged or has an air bubble?
  4. A

    Rough idle

    I have a 1997 and it’s running rough almost seems like a miss fire has a little smoke when idling it goes away when you start driving it with no smoke icp changed and cps changed they did a buzz test on the injectors and said they where good. No codes so I’m kinda confused on what to look for now.
  5. A

    How much boost?

    I’ve been searching and reading for days on this subject but I figured I would ask here to get clarification. How much boost can these motors hold? I have a 1994 turbo in mine with 500 miles on the rebuild. It does have arp head studs but what I’m after is at what boost is the bottom end going...
  6. A

    Fuel leak

    I have a fuel leak at one of the return lines on my 7.3 idi turbo. But is there any real benefit to the fuel rail from r&d compared to the regular return line set up?
  7. A

    No power to cab

    I have an 1987 that has a factory 94 7.3 idi turbo in it and a zf5 speed trans. I went to go start it this morning and turned the key on and I had power but when I pressed the glow plug button it lost all power I’ve checked the fuses
  8. A

    Ac questions

    So I’m wondering what parts will I need for my 1987 f250 it had ac still has the stuff but sense it’s got a 1994 7.3 idi turbo All I need is the lines that go to the compressor and the condenser. But my questions are the lines the same that go into the compressor and the condenser the same from...
  9. A

    7.3 idit

    Alright guys I’m looking at a 87 zf5 7.3 idi turbo has arp head studs and r&d injectors. And I’m also looking at a 96 12 valve with an auto but bone stock and has 250k on it. I’m pulling 10k to 13k and was wondering if the idi can handle that? 12 valve there asking 6k for and the idi is 3000
  10. A

    Hyrdroboost or steering gear

    I have a 2004 f250 4x4 so about a week ago while turning into my drive way the steering gear box bolts broke so got it fixed. But now when steering or pressing the brake pedal you hear a whining sound. Also the brake pedal is getting hard to press by the day. Truck is on a 6in lift with 37s any...
  11. A

    No heat in cab

    Hey guys I’ve recently got a 2004 6.0 I did head gaskets and some other stuff to it awhile ago. But I still don’t have heat in the cab I’ve checked the blend door it works and everything is hooked up if it gets up to operating temp I have heat for a split second then it goes back to cold air any...
  12. A

    ARP question

    What can I use for lube on arp head studs? I had some for my 7.3 but I tossed it when I moved.
  13. A

    6.0 head gasket question

    I have a 2004 6.0 has arp head studs and egr delete. I have coolant coming out of the over glow bottle. Is it possible for it to pop the head gasket with studs or is there something else going on.
  14. A

    Water in fuel light

    So I just bought my first 2004 6.0 Powerstroke it has 183,400 on it. I driver it home about 30 minutes. It was running great but on the first hill with some bumps the water in fuel light came on and it stumbled and had no power but it still got to the top of the hill. Then I let off the throttle...
Top