Search results

  1. Blackascoal

    Sputtering/loss of power at hard acceleration

    Speak of the devil. I found this on You Tube. Sounds like this guys truck was doing the same thing as mine. He goes through the selector valve and also does the external temp gas jug. I might try that.
  2. Blackascoal

    Sputtering/loss of power at hard acceleration

    Got it.
  3. Blackascoal

    Sputtering/loss of power at hard acceleration

    You hit on two of my next target areas: The tank selector and the IP going bad, I know that happens. I have the receipt and it say its was "sent out for rebuild." Nothing else specific. I going to check that selector valve over the weekend. I'm going to see if I can bypass the selector...
  4. Blackascoal

    Sputtering/loss of power at hard acceleration

    Yeah, thats what it feels like when it happens. I did replace the hoses you are talking about when I replaced the lift pump. Thank you.
  5. Blackascoal

    Sputtering/loss of power at hard acceleration

    Thanks for the reply. The answers to the ones I know are bolded and highlighted. I'll have to get back to you on the RPM'S. I'll try and take a video. A couple more points: 1. The truck is warmed up to normal operating temp. 2. I do not know the fuel pressure, but thought about...
  6. Blackascoal

    Sputtering/loss of power at hard acceleration

    1994 IDIT, 152,000 miles. Auto. Engine all stock. Truck starts and runs perfect, idles great and drives perfect until I floor it. When it reaches a higher RPM it sputters and makes a sound like an exhaust leak snd sputters, hesitates and has reduced power. I have to let up on the accelerator...
  7. Blackascoal

    Refrigerant leak around this valve?

    Outstanding thank you[emoji106] Sent from my iPhone using Tapatalk
  8. Blackascoal

    Do I have a limited slip rear diff?

    Awesome! D5, limited slip. Sent from my iPhone using Tapatalk
  9. Blackascoal

    Do I have a limited slip rear diff?

    1994 F350 dually, IDIT factory turbo, auto. Sterling 10.25 rear diff. Changing the fluid; do I have a limited slip that needs the modifier? Sent from my iPhone using Tapatalk
  10. Blackascoal

    Refrigerant leak around this valve?

    Thanks for your help! Sent from my iPhone using Tapatalk
  11. Blackascoal

    Refrigerant leak around this valve?

    Oh ok. Thanks. It’s probably the schrader. I’ve haven’t had to refill the refrigerant, etc. Is that system under pressure if I have to remove the valve? Anything to be careful of? Sent from my iPhone using Tapatalk
  12. Blackascoal

    Refrigerant leak around this valve?

    I’ve got a refrigerant leak around this valve, more like seepage, that runs down the side of this canister. Anybody else seen this? Is it a matter of just replacing the valve? What is that canister for anyway? Thanks Sent from my iPhone using Tapatalk
  13. Blackascoal

    Running rough under load

    Well that blows. No shipping from CDD until 10/31. Looking elsewhere. Sent from my iPhone using Tapatalk
  14. Blackascoal

    Running rough under load

    I’m ordering a new filter and also the fuel pressure gauge setup from Classic Diesel Design. Sent from my iPhone using Tapatalk
  15. Blackascoal

    Running rough under load

    Haven’t got on it cold. I will try though. Don’t know what fuel pressure is. Sounds like I need to find out. I’ve had the truck about 3 years, 20k and I haven’t changed the fuel filter. I’ll check for receipts from previous owner. I’ll check receipts for injection pump and injectors also. Thanks...
  16. Blackascoal

    Running rough under load

    I have a 94 F350 Turbo, auto, 150k. When truck is at operating temperature and when I floor it going up a hill or on a freeway on-ramp it stumbles slightly. Hesitates. It also emits a ticking sound. It sounds like there is a plastic bag stuck under neath (there isn’t of course). When I let off...
  17. Blackascoal

    Rear main seal leakage - should I use a stop leak? [1994 IDI w/ turbo]

    When they replace the tranny do they typically replace the rear main seal? I had my tranny done a couple years ago and now my rear main seal is leaking. Sent from my iPhone using Tapatalk
  18. Blackascoal

    Best 7.3 idi build.

    You want to have Wes at Classic Diesel Design rebuild it. R and D also rebuilds them. I see your in Arkansas. Wes is in San Antonio, TX. Sent from my iPhone using Tapatalk
  19. Blackascoal

    85 f-350 single cab 6.9l dually question on model

    That is a very rare truck! I have to say I’ve never seen a single cab dually in that body style, at least in Southern California. I have a 94 IDI dually crewcab and am always looking. Sent from my iPhone using Tapatalk
  20. Blackascoal

    E4OD rebuild

    I’ve heard good thing about John Wood. http://jwtt.com/home At a minimum, he lists what he does to his tranny’s. Sent from my iPhone using Tapatalk
  21. Blackascoal

    CDD 110 pump.

    Rollin some coal! I like it. Sent from my iPhone using Tapatalk
  22. Blackascoal

    Pyro probe location

    Attached is a pic of where I have my probe located, just past the exhaust manifold. I add about 200 degrees to what I’m seeing on my gauge. Does this sound right? Sent from my iPhone using Tapatalk
  23. Blackascoal

    Preorder Opportunity for CDD Intercooler Kits and 3" Downpipe Kits

    Does the inner cooler restrict the flow of air to the radiator? Any change in coolant temps? Sent from my iPhone using Tapatalk
  24. Blackascoal

    Preorder Opportunity for CDD Intercooler Kits and 3" Downpipe Kits

    What kind of HP and torque increases can you expect with everything else stock? What about boost and exhaust temp? Sent from my iPhone using Tapatalk
  25. Blackascoal

    Project: The New CDD Shop Truck

    Can you get a video of the flame at night? Sent from my iPhone using Tapatalk

Latest posts

Forum statistics

Threads
91,261
Posts
1,129,465
Members
24,090
Latest member
Larrymac

Members online

Total: 549 (members: 16, guests: 533)

Share this page

Top