2002 f250 superduty 7.3. I am replacing rear brakes that have not worked sense i bought truck. I have determined that there is no brake fluid pressure by opening bleeder screw a little got brake fluid release from bleeder. With bleeder loose i pushed on brake peddle and no additional fluid came...
no power to ac relay. in cab controls work power to purple wire. relay works when jumped. both low and high pressure switches jumped. No power to ac compressor clutch.
Any help would be appreciated
Thanks Don
I have a 2002 f250SD the instrument cluster lights have not worked sense i bought it. I have been trying to fix them but can not find a problem to fix, the warning lights work, all gauges work, just no illumination. Any idea's?
Thanks Don
While fixing oil leaks on top of engine i pulled a plug out of cylinder head hpop oil galley. Saw a line of what looked like very small brass particles in the oil! I then drained the engine oil and found a small amount of brass in it. My question is can the hpop be going out and is that what is...
cleaned off the oil cooler and can see the oil come out from the gasket where the cooler bolts onto the block above the oil filter. Can i remove and rebuild the oil cooler with motor still in truck? Is it better to remove motor?
Hello i have a 86 f250 with 6.9 and need to replace my heated fuel line from fuel pump to filter assembly. I can make a new fuel line but not with a heater in it. Is the heater needed? Are their any options or dealers for a replacement? Last problem to solve after changing motor and upgradeing...
Hello i have a 92 7.3 IDI. got it free has been setting for a year after owner saw water in crankcase.
This motor has been rebuilt and used very little in 10 years after rebuild. I took off the heads the head gaskets look ok. #2 and #4 cylinders have some rust at the top 1.5 inch's of the...
I have 86 f250 4x4 4spd with 6.9 non turbo that burns a good bit of oil. I found a 95 ambulance with 180k miles 2wd auto trans 7.3 for $600. My question is what do i have to change to make powerstoke work in my 86. Is it wroth it or should i find a good used idi motor. Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.