Search results

  1. SirRea63l

    Brake/Rabs issue, no rear bleeding

    I replaced my rear drums on my 94 CCLB 4wd zf5 because they were worn way down and the driver side was dragging. I noticed one wheel cylinder had a slight leak so I decided to replace both of them as well. Everything went smooth on the pad and cylinder replacement. The driver side cylinder...
  2. SirRea63l

    Never trust generic t-stats

    I had decided several months ago to re-do my cooling system, the truck ran warm on the highway and the fan never kicked on. I didn’t have a real gauge in it until recently but haven’t been driving the truck except around our property. It had a squeak when accelerating or reving the engine, I...
  3. SirRea63l

    1994 body on a 2010 frame?

    I have found a 2010 F250 4wd frame with axles, is it feasible to put my 1994 body and drivetrain on it? Would I gain a better ride? I am assuming it will not be a direct bolt on, but would it be worth doing? Frame has not been in a wreck and is complete. My initial thought is it won't be...
  4. SirRea63l

    Dreaded tire sizes

    i am due for new tires on the 94, still using the stock wheels and 235/85/16's and am curious if there is a slightly taller tire size I can use that will not require a lift and will not rub. I thought I could figure this it but I am having analysis paralysis. Current stock size is 31.7" and I...
  5. SirRea63l

    Speaker sizes

    I am going to redo the window motor gear stops on the 94 soon and will also change out the stereo system while I have the doors apart. I am getting conflicting information on the front door speaker size, Crutchfield is giving me both 5.25 and 6.5 speakers, Sonic says 6.5 front? I am sure...
  6. SirRea63l

    Radiator Flush

    On the 94 IDIT the radiator has obviously had tap water in it, I noticed some of the fins are a little caked up with calcium. What does everyone recommend for cleaning this out? It looks like the original brass unit so I am unsure about using vinegar as vinegar corrodes brass. I am not sure...
  7. SirRea63l

    Gauge install advice needed.

    I am about to install a 3 gauge pod with Boost, Water Temp and Pyro, the boost is easy as the 94 has a port in the intake hat, or snail shell. The water temp is hidden to me but I believe there is a port on top of the intake or block for the normal water temp sensor, I should be able to tap...
  8. SirRea63l

    Correct Bilstein Shocks

    I am getting around to replacing my shocks, I went with Bilstein 4600's and got the (supposedly) correct part numbers from BilsteinUS. I started on the rear since the bed is off and they are easy to get to. Took the first one off, looks like an original shock, and noticed the Bilstein has a...
  9. SirRea63l

    Fuel Tank Fun!

    I took yesterday off from building our house to pull the bed off of the 94. It has fuel and or air issues. I figured the shower heads were off and that is what the issue was, as well as maybe sending units as the tanks show almost full when it runs out of fuel. I figured the vents need help...
  10. SirRea63l

    Tie rods and related steering components

    I have a slight "pop" in the steering, tracked it down to a tie rod end and figured I would replace the whole steering linkage assembly. The process seems fairly straight forward, remove a complete assembly, bench fit the new one to as close as possible to old one, reinstall and head for...
  11. SirRea63l

    Strange starting issue.

    I am not really sure how to explain this, but I will try. Truck stalls and will not restart with key, it will spin over perfectly but not start, however if you push it and let out on the clutch, it will fire right up. Could this be a clutch safety switch malfunction or something else? This is...
  12. SirRea63l

    New member, old trucks.

    I have been lurking here for a while and figured it was time to say Hello. We have two IDI's, both F350 4x4's, the first is a 1991 E4OD that is basically our water truck. It needs a lot of help before it can be a highway truck. The front end is very loose and needs a rebuild, the glowplugs...

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,765
Members
24,098
Latest member
William88

Members online

Total: 643 (members: 6, guests: 637)

Share this page

Top