Search results

  1. Ironman03R

    Flowmaster 30 series 4" race muffler and 5"as tip

    4" in/out flowmaster race muffler. Almost new, it was mocked up on the truck engine fired to see what it sounded like, then put back in the box and truck was sold. Also included is a 4" in 5" out SS tip. $100 for both.
  2. Ironman03R

    Remote power steering reservoir

    I took this off an international bus with plans on adapting it to my truck. It has a filter inside and it's a pretty common setup in the big truck world so I imagine a filter would be easy to find. Or maybe it's just a screen, not sure never took it apart. $10 + shipping
  3. Ironman03R

    40 gallon rear tank with heater

    Approx 40 gallon rear tank. I took it out of an 86 and put it in my 94, so it has the correct sending unit for a 94 idi. I punched 2 holes into the top and put a copper pipe loop into the tank that I used to heat my waste oil. No leaks, has some dents and surface corrosion. Includes the tank...
  4. Ironman03R

    88 diesel 5speed cluster and black dash trim

    Cluster and trim out of 88 f350. $50
  5. Ironman03R

    Anyone want to get into reloading?

    I bought this stuff over a decade ago and have never used it. MEC 12ga reloader, sizer, hulls wads, shot, and powder. LEE single stage press. Dies for .44 mag Anyone interested let me know. Not really sure what to ask... Thinking about $300, if im too high I will listen to offers.
  6. Ironman03R

    Bushwhacker fender flares off my 94

    Found these a couple weeks ago,thought I sold them. They are OE style flares for the front fenders I used to cover up some rust. No screws. Pickup only, not worth shipping. $20
  7. Ironman03R

    Dually fenders

    Fenders off my 94. Some tabs need repair as they were damaged during removal. There is some wear in thefiberglass from the mudflaps rubbing. $100 obo for pair. I won't ship. Located in NW OH
  8. Ironman03R

    Added some bling to the truck

    Got some vinyl decal inserts for the recessed super duty letters on the new truck. I was going to do black but found these and thought it just fit. Also added raptor engine emblems.
  9. Ironman03R

    Aluminum tool box, tonneau cover, and aluminum bed protectors

    Aluminum tool box, bed rail covers, header protector and tailgate protector. Also a tonneau cover off a short bed Chevy that fits perfect with the tool box on the 8 foot bed. All has dents and scrapes, cover is fair condition, needs center bow fixed again. $200 takes it all!
  10. Ironman03R

    12v P-Pump Cummins swap

    Selling the engine trans radiator and intercooler and any other brackets you may need. 220K starts right up. I drove it home. Engine is a 5.9 12V trans is an Allison 545 auto. $2500 you will help me pull it. OR $3000 takes the whole truck. It weighs 8820lbs Bring big enough trailer and we...
  11. Ironman03R

    Upgraded E4OD transmission

    Trans from my 94, all internals upgraded to 4r100 components. HD tripple disc low stall torque converter. Will include external filter, cooler and electric fan. Just drained fluid last weekend when removed and it looked brand new. I don't remember the miles on it, can't be much maybe 30k...
  12. Ironman03R

    Bricknose fenders

    Nice pair of fenders off 88 f350, only surface rust. Passenger side has skim coat of mud above bumper, believe it was dent repair. $50 for the pair. Pickup in NW Ohio
  13. Ironman03R

    Bucket seats, doors and interior parts

    I'm selling the rest of my 94 f350 crew cab. Some remember I was using it to build a Cummins powered f600 but have decided to scrap all projects. Anything from the f350 is available, and eventually the f600 will be cut up. These seats are nice and they match the rear. Also has custom built...
  14. Ironman03R

    Dt466/360 injection pump

    Ok DT guys I came across this pump in the garage attic. Pulled it from an engine years ago don't know what it was from, thinking 360. I don't need it so I will sell it to someone that does. Asking $100 + shipping
  15. Ironman03R

    Rear air ride from International bus

    Bought a few years ago, not using it now. Was complete and functional when cut off school bus chassis. $200 pickup in NW Ohio
  16. Ironman03R

    Hitch

    Nice hitch reciever, 2" believe to be cat V can't see tag anymore. Hitches slide in and out fine, no rust. Bolts were cut. $50. Located in Ohio
  17. Ironman03R

    Gooseneck turnover ball hitch

    I believe this to be a b&w turnover ball gooseneck hitch. The ball is missing, can be bought online for 75 to 100. Mounted on 88 f350, release lever and pin slide as they should. The springs on the pop up safety chain hooks were rusted and need replaced also but are included. Make offer I...
  18. Ironman03R

    88 f350 tilt cruise manual steering column

    Column out of 88 f350. Has tilt cruise and for manual transmission. Comes with keys. $50 Located in NW Ohio but can ship.
  19. Ironman03R

    88-91 Front clip

    Nice font clip, hood is cracked at hinge mount, some dents and dings, no major rust. $200 for the whole thing. Located in NW Ohio
  20. Ironman03R

    88 7.3 engine

    Starts and runs. Needs water pump, one is included. Also including extra ip and low miles reman injectors. Complete still in truck can hear run. Unknown miles. $500
  21. Ironman03R

    97 F150 3-door Extended cab 4x4 in NW OHIO

    I got this to replace my 2000 f150 but then found out we were having another kid so decided to cut it loose, its nice but not perfect. Only known issues are front control bushing makes noise over bumps, driver side front converter has small leak on the seam, and the engine light is on for the...
  22. Ironman03R

    150 gal Fuel tank with A/C pump

    approx. 150 gal fuel oil tank that I used to store filtered WMO. Includes 110v fillrite transfer pump with auto shutoff nozzel, and goldenrod filter. Located in NW Ohio $300 Also have a crude transfer pump and 55gal storage barrel that can go with it.
  23. Ironman03R

    Anyone want this 89 F350?

    Brought it home 3+ years ago with good intentions, did some work to it, bought some parts and it just sets in the driveway. 7.3 5-speed very little rust for the area, good tread Goodyear tires. Needs clutch installed, new one currently sitting in cab. Needs batteries and waterpump. Rear tank...
  24. Ironman03R

    Turbo

    Cleaning out the garage and found a turbo. I'm pretty sure its for a DT466/360 engine family. I was going to use it on an IDI engine. 3" intake 4" exhaust outlet. AR .50 M43 cast into compressor housing. Spins free looks to be in good shape. Has been oiled and taped up in storage for awhile...
  25. Ironman03R

    New IDI turbo

    I bought this at least 12yrs ago incase I ever needed it. It was NOS Factory reman from a Ford dealer in Port Clinton OH. The pics don't do it justice this thing is as it was when new! The anti rust paper wrapped around it has a date of March 1996! If anyone is in need of a replacement turbo...

Latest posts

Forum statistics

Threads
91,281
Posts
1,129,775
Members
24,099
Latest member
IDIBronco86

Members online

Total: 755 (members: 4, guests: 751)

Share this page

Top