About a month ago my F350 7.3 power stroke absolutely quit right in the middle of driving is if you shut the key of the vehicle off. I had it towed to a shop they replaced the fuel filter and it appeared to be running good. Once I picked it up I drove it for 15 to 20 minutes and once again ran...
I have a 2003 F350 7.3 power stroke. I just had a local diesel shop do some work on it they actually put a new driver side manifold on put new uppipes on flushed the coolant from the system and put the new serpentine belt idler pulley and tensioner pulley. My trip is going to be about 1400 miles...
I had a local shop put new glow plugs in my 2003 7.3 power stroke. My up pipes were also leaking so they replaced those with the new ones that I guess the flanges bolt together. They had to remove the turbo to do the up pipes and for some reason it doesn’t feel like it’s making boost they think...
1993 f250 IDI. The truck started something new when you start it it idols great for about 20 seconds then starts running really rough. stalls out. Then it takes about a minute of cranking to get it to start and idols fine. After that it runs fine.
Now it will run rough out of nowhere. No rhyme...
The guy I got my axles off disappeared. I actually paid him for my rear springs but it looks like I will need another set. Does anyone know of a source for a set and a good place to get the 4" blocks?
Thanks
so I just swapped out the good tires I just got on the truck....the door states 44 front and 80 rear (cold).....44 front seems low to me.....is that correct.
The new tires are Michelin LTX M/S 235/85/16
So I found a really good deal on a second set of the steel factory rims for my 93 F250. I want to clean them up and take them before I put them on but I am kind of up in the air of what color I should do. Stick with the factory gray or do something different the truck in the spring will be...
So I've had a pretty good knock upfront when I'm in four-wheel-drive and I let off the gas. I had a bad spindle bearings so we ordered a kit from Dana. I have a Dana 50 upfront right now. After doing a U joint and some other things we found out that the carrier gear is shot inside the pumpkin...
So we've had this transmission on here ever since I got it rebuilt. We put on a new FIPL sensor and we have idol adjusted at 1.1. I had a broken wire that occurred over my pumpkin for the VSS, but that has been since repaired my tack works perfect. I do have another PCM on the way that I found...
So we were pretty cold last night and today. I wasn't home and didn't have a place to plug in. 10* out and just couldn't get it to start. borrowed a cord and found an outlet, plugged for an hour and fired right up. I have noticed my wait to start light only comes on for around 3 sec. I don't...
So right now I have 235/85/16 on my 1993 f250 7.3 IDI....My tires are dry rotted and I am going to replace them. I don't want to go real big, but does anyone know what a "next size up" that would work without going too aggressive? Thanks for the input
So I ordered in my Motorcraft fuel filter from Ford and I have my diesel kleen ready to go. I have never done this on this diesel before. And from a lot of what I've read even if I filled the filter up with diesel kleen before I put it back on I will probably still have to crack the injectors...
So when I got the truck reverse was shot. So I had the trans rebuilt completely with new converter. If I start out really slowly it shifts normal most of the time. If I give it normal gas or a normal start it kicks pretty hard shifting. The tach seems to be operating great, as with the speedo...
took the whole dash out trying to find out why we were having electrical issues....turns out the guy who owned this before me swapped the cab and left the dash harness from a gas in the truck. so now does anyone know how to modify one to work with the 7.3IDI? or does anyone know where to get...
So I just got this truck and we have fixed several things on it. My tach works, but when I turn the headlights on it stops. Any ideas what to check? sorry for the short post, in between work!!! just wanted to get something out there for idea!!
Dave
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.