Search results

  1. sle2115

    Manual Tank Selector Valves

    Ok, for those of you who have converted to manual tank select valves, what did you use? Someone posted valves with three inputs and one output, which is how I plan to go, then I can add an in the bed tank for a long trip if I want. Now, what about fuel gauge wiring, I'm guessing there is a...
  2. sle2115

    IDI Parts

    I have a complete set of Rocker Arms IHC, new in the box. Part number is 1809417C91 (8 boxes with a pair in each box) - Make offer I also have a new set of Pushrods, still sealed. Part number is 1804338C1 - Make offer...
  3. sle2115

    Fuel Level Gauge

    Ok, this is getting aggravating! I put a set of white gauge decals on all my gauges. I removed the needles, carefully, painted them and reinstalled them. All gauges work fine except my fuel guage...and it didn't stop working right after the decals, but shortly after, so I assumed I assed it...
  4. sle2115

    WTB Gauge Cluster

    Looking for a gauge cluster for my 87, with tach. My fuel gauge decided to stop working and I've tracked it down to the actual gauge.
  5. sle2115

    Death Wobble

    Ok, well, as the title says, I seem to have contracted it. Haven't been under it yet, but plan to today. What should I look for? I replaced the track arm bushings with Poly ones when I put the Dana 60 under my truck. I had the truck that the axle came out of, used all the factory bracketry...
  6. sle2115

    ARP Head Studs

    I've got an extra set, brand new in the box. I'll take $275 shipped for them. Last I looked they were more than that without shipping. I got a good deal on them and don't need two sets, so thought I'd pass them on. They are for a 6.9
  7. sle2115

    Heater cores

    Ok, so in the time I've had my truck, I put an aftermarket heater core in, about a year (little less) it started leaking, so I put an OEM one in, got about a year out of it, replaced it with another OEM, less than two years later, it's now leaking. Went to take deer to the processor tonight and...
  8. sle2115

    Parts for sale

    I have some extra parts I need to sell... Complete IH brand main bearing set - $50 shipped = SOLD Complete IH brand rod bearing set - $50 shipped - SOLD Injector pumps are SOLD - Complete line set - $50 shipped - Big Block Chevy fuel pump block off plate - $10 shipped IH rear main seal...
  9. sle2115

    WTB steering column

    Looking for a good tilt steering column for my 87 F250. I put this one in it with an aftermarket steering wheel, started grabbing, went back to the factory wheel, which seemed to fix the problem, and now it's doing the same. Feels like the thing is going to lock up while driving. Seems to...
  10. sle2115

    Camshafts/Parts for sale

    For those of you who've been looking for a camshaft core, I have two of them. $40 each plus shipping. Also have the following: 2 Injection pumps...both were supposed to be off running engines, one has a tag from a reman shop in Findlay, Ohio - I'll take $30 plus shipping for each of them...
  11. sle2115

    Parting Out 2 6.9 engines

    I've got two 6.9 engines I'm going to be parting out, if you need something, let me know, make offer + shipping. Not looking to get rich, basically just want to get them out of my way. Hope to start tearing them down tomorrow.
  12. sle2115

    6.9 Parts for Sale

    I have a complete line set and an extra oil cooler, probably have more as I go through stuff...make me an offer on either Also have a core injector pump...bought it from someone to put on the shelf...make me an offer...supposed to be off an 87, doesn't have anything for auto transmission attached
  13. sle2115

    Fuel issues

    Ok, body lift, new cab mounts, etc. are on. As I had the truck down for all this, i noticed a drip of fuel coming from the pollack valve. I've tracked it down and it is the fuel line that goes from the valve to the engine. It's actually not the valve, but the line about 2-4 inches from the...
  14. sle2115

    2 inch body lift

    I have 8 lift blocks left from my kit, I bought the complete kit for my 87 F250, but only needed 6 for the cab. Have the bolts as well if anyone has a setup like mine (cab and flatbed) and wants them, pm me. I paid like $107 plus shipping for the kit, I'll sell the 8 I have with bolts for $55...
  15. sle2115

    3G wireless router

    I remember sometime ago we were having a discussion about using a wireless aircard with a router. I bought a router, then decided to just stick with the local wireless service. I'm going to list it on ebay but thought if anyone here wanted it, I'd make you a good deal. I paid over $100 for...
  16. sle2115

    Cab Mounts and Body Lift

    Well, old cab mount bolts are out, cab mounts are definetely shot. I have new poly mounts and the 2" lift in hand, but need to get new sleeves for the mounts. Anyone got a suggestion where to get them? I figure I'll have to go to a dealer, but I don't deal well with the local one so I'll check...
  17. sle2115

    Dash Illumination

    Well, everything is back together from the hydroboost install, everything seems to be working well except now my gauge illumination lights do not work. Checked power to the fuse (5 Amp) and the fuse, all is well there. I put all new bulbs in, put new bulbs everywhere, wait to start light...
  18. sle2115

    Bricknose cab mount experience needed!!!

    I want to put a 2" lift on my 87 F250 Standard cab 4X4. What is the difference between the 80-86 and 87-91 body lift kits? I'm hoping the only difference is the bed cause I won't need that part of the kit anyway, but the 80-86 kits is half the price...just wondering if I can use it?
  19. sle2115

    Gauge Needles

    Ok, so I know some of you have painted the speedo, tach, temp, op, etc. guage needles in your trucks. How did you do it? Did you remove the needles? Just mask around them? Mine are about like a yellow color and I'd like to brighten them up (since I've got the whole damn truck torn apart...
  20. sle2115

    Hydroboost - need help

    Ok...transmission is in, acting very nice! 1900 at 60 MPH on the GPS, I'm quite pleased. Shifts nice, seems to have plenty of grip and truck seems to run very nicely with the ZF5 addition. So, yesterday, I started on the hydroboost. Booster is on, lines are ran, etc. Now I just have to...
  21. sle2115

    More on the mule

    Ok, zf5 is in, inspection cover is removed...this one (from my T19) isn't going to work, it's just too tweaked. So, if anyone has an inspection cover from a ZF5 they'd be willing to part with, I'd be willing to buy it. Otherwise, transmission is in, have to drill holes for crossmember wings...
  22. sle2115

    Work in Progress

    Ok, the ZF5 is in, everything is hooked up except the driveshafts. Just started it and hear a metalic rub up near the flywheel. I assume the inspection cover, and I'll have to remove the y-pipe to get it out for a look. Otherwise, everything seems to be working. A couple questions...
  23. sle2115

    ZF5 Install

    Just wanted to ask, is there supposed to be an inspection plate that goes over the opening on the bottom of the ZF5 bell housing? I assume there is, but I don't have one...anyone have a picture? Thanks in advance
  24. sle2115

    Misc ramblings

    Just wanted to post some information on my experience with the gear change... Drove to deer camp, about 2 hours (longest drive I've taken my IDI on as well) and all went well. Having had 3.55's and 4.10's, both for quite sometime, I have to tell you, neither compare to the 3.73's. At the...
  25. sle2115

    New OTC 3367 Digital Advance Timing Light

    A friend of mine bought a new OTC 3367 digital advance timing light and never used it. He is now buying a diesel timing meter and is going to sell this one. He needs to move it quick and said he'd take $125 for it shipped. He paid $150 plus shipping for it and it's never been used. Cords are...

Latest posts

Forum statistics

Threads
91,280
Posts
1,129,761
Members
24,098
Latest member
William88

Staff online

Members online

Total: 641 (members: 10, guests: 631)

Share this page

Top