Search results

  1. Giddy-Up

    Dana 60 Knuckles

    I'm looking for a set of the later style ~95-97 Dana 60 knuckles with the bolt on caliper mounts, NOT the slide pin style. Thanks
  2. Giddy-Up

    7.3 PSD Up-pipes

    I've got Irate diesel bellowed up pipes that I never used before deciding to go with a different turbo setup. I'd like to get $500 for them since they're unused, they sell for $600. I'm not on this site very much, but i'll try and check though. Text would be best. 701-263-1040
  3. Giddy-Up

    What does your OBS weigh?

    I've been doing some thinking lately about just what a OBS can handle. I know there are tons of threads about "how much have you towed" but I'm curious what the pickup and trailer weigh combined. Some pickups weigh a lot less than mine and there are ones with service bodies that weigh more...
  4. Giddy-Up

    WTB Rear Sway Bar Brackets

    Looking for a set of the rear sway bar frame mounts off a 4wd. As far as I know they're the same on F150-350, 1980-97
  5. Giddy-Up

    Motor Mount Frame Plates

    I have two sets of IDI motor mount plates that bolt to the frame, they came off of parts trucks. Make an offer.
  6. Giddy-Up

    WTB 7.3 AIC (Idle controller)

    Closed, Thanks
  7. Giddy-Up

    WTB Offenhauser Intake Ford 300

    I'm looking for and offenhauser intake for a "Big Six" Ford 300. Let me know what you got. Thanks
  8. Giddy-Up

    Lund Summer and Winter Fronts

    I'm selling these for a friend they were bought when the pickup was new 2001 and used for a year then set aside, still have the boxes, instructions and mounting hardware. Summer screen front and solid winter front, total of 6 stainless pieces. Make an offer
  9. Giddy-Up

    Tekonsha Voyager Brake Controller

    Came in my pickup, works fine just not the controller I prefer to use. Make an offer
  10. Giddy-Up

    90 F350 Build Thread (Sort Of)

    This isn't really going to be a build thread so much as a place for me to put pictures and document the changes I make over time. As it sits it's a rust free 2wd EC/LB dually with a 7.3/E4OD 4.10 gears the body has 127,000, motor has 60,000. My plan is to make it into a reliable/comfortable...
  11. Giddy-Up

    83 F250 6.9

    I'm thinking about selling my 83 since I recently picked up a rust free 90, and was wondering what it's worth. The pickup has around 196,000 miles while the motor only has about 85,000 runs good doesn't burn a lot of oil, clutch is still good. The body has the typical rust along with some fender...
  12. Giddy-Up

    Dually Fuel Filler vs SRW

    I'm planning on removing the flatbed on my DRW 90 in favor of the factory box. But my filler necks have been modified, so I need to get replacements and there are no duallys in the local yards. Are filler necks from a SRW the same? Thanks
  13. Giddy-Up

    WTB Bricknose Fuel Filler Necks

    WTB Dually Fuel Filler Necks I'm looking for both the front and rear filler necks with hoses for my 90 dually. Thanks
  14. Giddy-Up

    Worth the gamble?

    It's not that far away from me and I know there's parts on it that I could use. Just not sure if their is a chance of saving the motor so I thought I'd get some expert opinions. :D http://www.bismanonline.com/medina_nd/parts_truck_6_9_4x4_4_speed_ford
  15. Giddy-Up

    Front Axle Question

    Hopefully someone has a dana 60 laying around and can help me with this. I need the angle of the caster, spring perch, and pinion in relation to one another. The best way I can think to do this is to position the axle so that the spring perch is at zero degrees then measure the others in...
  16. Giddy-Up

    Bent Frame

    As mentioned in a previous thread I've been collecting parts to build an IDI powered super cab mutt. The frame I bought is from a 94 4x4 which is rust and hole free, but unfortunately the driver side rail is pulled outward 3/4" behind the trans crossmember. It makes the frame about 1 1/2" out of...
  17. Giddy-Up

    Banks Power Pack Lid

    Not sure if these actually help with power, but having a bigger filter might be worth it to some. http://www.ebay.com/itm/1980-1986-Ford-F-350-F-250-DIESEL-Truck-BANKS-POWER-PACK-air-cleaner-Lid-6-9L-/181500684028?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a4248a6fc&vxp=mtr
  18. Giddy-Up

    Lund Moon Visor

    I know this should be in the marketplace, but it's not mine so. :dunno http://www.bismanonline.com/bismarck_nd/ford_lund_moon_visor It's one heck of a deal in my opinion even has the harness and I know that there are still guys out there that are fans of them like me. I just don't need...
  19. Giddy-Up

    Cab Swap Question

    I've decided that I want an super cab so I'm going to build one since they're hard to find in good shape around here. I've got an OBS SC/LB frame that I'm putting a '81 f150 cab on. The truck will be running a 6.9/t19 setup with a f350 rear axle and springs, so it will be plenty capable of...
  20. Giddy-Up

    WTB 92-97 f-250 or f-350 Frame

    I'm looking for an extended cab long box frame, can't be real rusty or bent up. I'd prefer one that has not had anything welded to it or excessive holes drilled, but let me know what you have. I would also like it to be a 4wd frame but it's not a big deal if it isn't. I'm located in North...
  21. Giddy-Up

    6.9 Block Pictures (early vs late)

    I've searched this and other sites trying to find out how to tell the difference between the early and late blocks. I've found plenty of info on the serial numbers but different people will tell you too look at different locations on the engine.:dunno So I thought I'd ask if anyone had pictures...

Latest posts

Forum statistics

Threads
91,259
Posts
1,129,360
Members
24,084
Latest member
E Moeller

Staff online

Members online

Total: 354 (members: 7, guests: 347)

Share this page

Top